Pico2 and power problem

[opquito]

Hello,
I've a Pico2 and I noticed that when I unplug the power cable (or PoE cable) and I reconnect it in less than 45 seconds, the second LED (ethernet activity) doesn't turn on...I wait 4hours and nothing, I always need to unplug the cable again and wait at least 45 seconds and then reconnect it again...I want to know if it's a common situation?

Because when there's a power cut the Pico2 crashed, and when energy come (if the power cut is less than 40seconds) the device don't boot.

:)

[MCunha]

I have EXACTLY the same problem!!!!!!

http://ubnt.com/forum/viewtopic.php?t=11722&sid=87f370b69bdbb5ce6f1d0a558df20731

Right now I'm a little worry, since you didn't receive any answer 25 days after your post...

Regards.

[along5664]

I am seeing same issue...Hopefully they can figure out the issue..

[UBNT-Mike.Ford]

Hey Guys,

I am looking into this right now. I have been unable to reproduce the problem at this time.

Wich power adapters are you using?

Thanks,

Mike

[along5664]

I am using the one that came with the pico.

[MCunha]

I've tested with 3 power adapters: 15v that comes with Pico2, one 12v and other 18v.
The problem occurs with anyone.

Regards.