View Full Version : Repeater bridge
zrob_12
04-30-2009, 09:29 AM
I need to create a repeater bridge with 2 Pico2s and I tried using the instructions at this link: http://wiki.ubnt.com/wiki/index.php/AirOS_Wireless_Repeater_Configuration
Is this information incorrect or is there possibly something I am doing wrong?
zrob_12
04-30-2009, 10:59 AM
AP#2 is not communicating with AP#1 and vice versa
Set radio #1 as a plain AP and radio #2 as a plain station and see if they connect. If they don't, then any other configuration won't work.
zrob_12
04-30-2009, 12:45 PM
They do connect with that configuration WHT.
Good...that narrows the scope of the issue. It appears it related to the WDS settings.
Leave the first radio as a simple AP and the second radio set as AP-WDS and use auto peer for now. See what happens.
You do have the latest firmware, right?
zrob_12
05-03-2009, 07:12 PM
Latest firmware, yes. I got tired of messing with the Picos and was able to achieve the same result with a couple Nanos, but thanks for your input
