View Full Version : LiteStation does not scan using SR71A
hellbound
04-28-2009, 12:13 AM
Hi Guys,
I've got a pair of SR71A trying to bridge them , I set one in AP mode and another one in STATION mode but it does not scan the other one, I tried all different settings for channel configuration but there was no luck.
Any special reason or do I just have faulty cards? they do scan other AP around though.
Thanks
Seyed Mohammad
UBNT-Mike.Ford
04-29-2009, 05:39 PM
Hello,
Please post your configuration files.
Thanks,
Mike
hellbound
05-22-2009, 09:45 AM
took me a while for this:
users.status=enabled
bridge.1.stp.status=disabled
igmpproxy.status=disabled
netmode=bridge
ebtables.51.status=disabled
ebtables.50.status=disabled
resolv.status=enabled
resolv.nameserver.2.status=disabled
resolv.nameserver.1.status=enabled
resolv.nameserver.1.ip=0.0.0.0
iptables.status=disabled
ppp.1.status=disabled
iptables.3.status=disabled
ppp.status=disabled
ppp.1.password=
wpasupplicant.device.1.status=disabled
wpasupplicant.status=disabled
aaa.1.status=disabled
aaa.status=disabled
wireless.1.scan_list.status=disabled
wireless.1.ap=
wireless.1.authmode=1
radio.1.chanshift=
radio.1.clksel=
radio.1.mcastrate=
radio.1.cwm.extoffset=-1
radio.1.cwm.enable=0
radio.1.forbiasauto=0
radio.1.countrycode=840
wireless.1.macclone=disabled
wireless.1.wds=disabled
users.1.status=enabled
users.1.name=ubnt
users.1.password=VvpvCwhccFv6Q
httpd.status=enabled
httpd.port.http=80
radio.status=enabled
radio.countrycode=840
radio.1.status=enabled
radio.1.devname=ath0
radio.1.mode=managed
radio.1.rate.max=
radio.1.rate.auto=disabled
radio.1.ieee_mode=11naht40minus
radio.1.txpower=14
radio.1.acktimeout=25
radio.1.ack.auto=enabled
radio.1.shortgi=enabled
radio.1.cwm.mode=1
radio.1.ampdu.status=enabled
radio.1.ampdu.frames=32
radio.1.ampdu.limit=50000
wireless.status=enabled
wireless.1.status=enabled
wireless.1.devname=ath0
wireless.1.security=none
wireless.1.ssid=UBNT11n
wireless.1.hide_ssid=disabled
bridge.status=enabled
bridge.1.devname=br0
bridge.1.fd=1
bridge.1.port.1.devname=eth0
bridge.1.port.2.devname=ath0
netconf.status=enabled
netconf.1.status=enabled
netconf.1.devname=eth0
netconf.1.ip=0.0.0.0
netconf.1.netmask=255.255.255.0
netconf.1.up=enabled
netconf.1.promisc=enabled
netconf.2.status=enabled
netconf.2.devname=ath0
netconf.2.ip=0.0.0.0
netconf.2.netmask=255.255.255.0
netconf.2.up=enabled
netconf.3.status=enabled
netconf.3.devname=br0
netconf.3.ip=192.168.1.20
netconf.3.netmask=255.255.255.0
netconf.3.up=enabled
dhcpd.status=disabled
dhcpd.1.status=disabled
dhcpc.status=disabled
dhcpc.1.status=disabled
dhcpc.1.devname=br0
route.status=enabled
route.1.status=enabled
route.1.devname=br0
route.1.gateway=192.168.1.1
route.1.ip=0.0.0.0
route.1.netmask=0
ebtables.status=enabled
ebtables.1.status=enabled
ebtables.1.cmd=-t nat -A PREROUTING --in-interface ath0 -j arpnat --arpnat-target ACCEPT
ebtables.2.status=enabled
ebtables.2.cmd=-t nat -A POSTROUTING --out-interface ath0 -j arpnat --arpnat-target ACCEPT
ebtables.3.status=disabled
ebtables.3.cmd=-t broute -A BROUTING --protocol 0x888e --in-interface ath0 -j DROP
ap:
users.status=enabled
bridge.1.stp.status=disabled
igmpproxy.status=disabled
netmode=bridge
ebtables.51.status=disabled
ebtables.50.status=disabled
resolv.status=enabled
resolv.nameserver.2.status=disabled
resolv.nameserver.1.status=enabled
resolv.nameserver.1.ip=0.0.0.0
iptables.status=disabled
ppp.1.status=disabled
iptables.3.status=disabled
ppp.status=disabled
ppp.1.password=
wpasupplicant.device.1.status=disabled
wpasupplicant.status=disabled
aaa.1.status=disabled
aaa.status=disabled
wireless.1.mac_acl.16.mac=
wireless.1.mac_acl.16.status=disabled
wireless.1.mac_acl.15.mac=
wireless.1.mac_acl.15.status=disabled
wireless.1.mac_acl.14.mac=
wireless.1.mac_acl.14.status=disabled
wireless.1.mac_acl.13.mac=
wireless.1.mac_acl.13.status=disabled
wireless.1.mac_acl.12.mac=
wireless.1.mac_acl.12.status=disabled
wireless.1.mac_acl.11.mac=
wireless.1.mac_acl.11.status=disabled
wireless.1.mac_acl.10.mac=
wireless.1.mac_acl.10.status=disabled
wireless.1.mac_acl.9.mac=
wireless.1.mac_acl.9.status=disabled
wireless.1.mac_acl.8.mac=
wireless.1.mac_acl.8.status=disabled
wireless.1.mac_acl.7.mac=
wireless.1.mac_acl.7.status=disabled
wireless.1.mac_acl.6.mac=
wireless.1.mac_acl.6.status=disabled
wireless.1.mac_acl.5.mac=
wireless.1.mac_acl.5.status=disabled
wireless.1.mac_acl.4.mac=
wireless.1.mac_acl.4.status=disabled
wireless.1.mac_acl.3.mac=
wireless.1.mac_acl.3.status=disabled
wireless.1.mac_acl.2.mac=
wireless.1.mac_acl.2.status=disabled
wireless.1.mac_acl.1.mac=
wireless.1.mac_acl.1.status=disabled
wireless.1.mac_acl.policy=allow
wireless.1.mac_acl.status=disabled
wireless.1.wds.6.peer=
wireless.1.wds.5.peer=
wireless.1.wds.4.peer=
wireless.1.wds.3.peer=
wireless.1.wds.2.peer=
wireless.1.wds.1.peer=
wireless.1.autowds=disabled
wireless.1.ap=
wireless.1.authmode=1
radio.1.chanshift=
radio.1.clksel=
radio.1.mcastrate=
radio.1.cwm.extoffset=1
radio.1.cwm.enable=0
radio.1.forbiasauto=0
radio.1.countrycode=840
wireless.1.macclone=disabled
radio.1.channel=60
wireless.1.wds=disabled
users.1.status=enabled
users.1.name=ubnt
users.1.password=VvpvCwhccFv6Q
httpd.status=enabled
httpd.port.http=80
radio.status=enabled
radio.countrycode=840
radio.1.status=enabled
radio.1.devname=ath0
radio.1.mode=master
radio.1.rate.max=
radio.1.rate.auto=disabled
radio.1.ieee_mode=11naht40plus
radio.1.txpower=14
radio.1.acktimeout=25
radio.1.ack.auto=enabled
radio.1.shortgi=enabled
radio.1.cwm.mode=1
radio.1.ampdu.status=enabled
radio.1.ampdu.frames=32
radio.1.ampdu.limit=50000
wireless.status=enabled
wireless.1.status=enabled
wireless.1.devname=ath0
wireless.1.security=none
wireless.1.ssid=UBNT11n
wireless.1.hide_ssid=disabled
bridge.status=enabled
bridge.1.devname=br0
bridge.1.fd=1
bridge.1.port.1.devname=eth0
bridge.1.port.2.devname=ath0
netconf.status=enabled
netconf.1.status=enabled
netconf.1.devname=eth0
netconf.1.ip=0.0.0.0
netconf.1.netmask=255.255.255.0
netconf.1.up=enabled
netconf.1.promisc=enabled
netconf.2.status=enabled
netconf.2.devname=ath0
netconf.2.ip=0.0.0.0
netconf.2.netmask=255.255.255.0
netconf.2.up=enabled
netconf.3.status=enabled
netconf.3.devname=br0
netconf.3.ip=192.168.1.19
netconf.3.netmask=255.255.255.0
netconf.3.up=enabled
dhcpd.status=disabled
dhcpd.1.status=disabled
dhcpc.status=disabled
dhcpc.1.status=disabled
dhcpc.1.devname=br0
route.status=enabled
route.1.status=enabled
route.1.devname=br0
route.1.gateway=192.168.1.1
route.1.ip=0.0.0.0
route.1.netmask=0
ebtables.status=enabled
ebtables.1.status=disabled
ebtables.1.cmd=-t nat -A PREROUTING --in-interface ath0 -j arpnat --arpnat-target ACCEPT
ebtables.2.status=disabled
ebtables.2.cmd=-t nat -A POSTROUTING --out-interface ath0 -j arpnat --arpnat-target ACCEPT
ebtables.3.status=disabled
ebtables.3.cmd=-t broute -A BROUTING --protocol 0x888e --in-interface ath0 -j DROP
hellbound
05-22-2009, 09:47 AM
I tried to change the hichannel and lowchannel, but also didn't help at all.
