View Full Version : Midium range Enterprise Network
netjal
04-22-2009, 06:44 AM
We want to set up Network which contain more then 40 Base station interconneted by microwave, Each Base station Contain 2/4 PS5 EXT or
Bullet 5 (1000mW) with 17 dbi sectoral Antena for each sector, Anybody can suggest me link rang with Pico , Nano, PS5 and specially with PS5EXT/Bullet 5(100mW) with 28.5 dbi Solid dish/Grid antena
Thanks
Can you post a drawing of what you want to do? Its a little confusing the way your are describing it here.
netjal
04-25-2009, 02:42 AM
Dear all
here is our design proposed network. We like to know the range of the device .
Plz see he url link then click view button to get clearer photograph
http://www.syscombd.com/Downloads/Range1.htm
Speed, distance, reliability, cost...Pick three.
Cost has already been determined.
Lets use 17 dBm as the lowest fade margin.
Plug in the numbers for the radios from the data sheets.
That will give you your answers for the predicted ranges.
netjal
04-26-2009, 02:35 AM
Speed, distance, reliability, cost...Pick three.
Cost has already been determined.
Lets use 17 dBm as the lowest fade margin.
Plug in the numbers for the radios from the data sheets.
That will give you your answers for the predicted ranges.
Can plz give me Rf calculation refering BTS one model of radio bullet with
17 dbi sectoral to bullet with 29 dbi grid
TPO + TX ant gain - free space diversion loss + RX ant gain + RX sensitivity = end point signal level
End point signal level should be at least the level required for annual daily average up-time percentage required.
For any additional answers, I'd strongly recommend a professional consultant to assist you.
