rado3105
04-09-2009, 01:18 AM
Hi, this is diagram of my network:
http://i41.tinypic.com/24fgwn4.png
I have main router(router1 - alix, ROS), it is default gateway to internet and there is nanostation5(AP1) as ap connected to router1 over ethernet.
The signal is going to another AP1, also nanostation5 as client. The second AP1 is connected to router2(mikrotik rb532a, ROS) and from this mikrotik is going ethernet to nanostation2(AP2) which working as AP(the clients are connected to it). Till now I had ewerything bridged, but when client with worse connection quality(connected to AP2) was downloading, pings went pretty up(about 100ms and more), also when more people were downloading at the same time. Pings were high also on connection between
AP1 < -- > AP2, which has throughoutput about 20MBit(quality of signal -72, CCQ 80-90%). Connect which is going over air to clients is 8MBits.
I changet it, that router1+AP1 <---> AP1+router2 is bridged, and broadcast(AP2), all interfaces on router2 and all clients connecting to AP2 are routed. But still the same. Propably the only thing would be to route it everything, but in that case I lost possibility of connecting from pc connected to router1 to other parts of network. Can you help?
http://i41.tinypic.com/24fgwn4.png
I have main router(router1 - alix, ROS), it is default gateway to internet and there is nanostation5(AP1) as ap connected to router1 over ethernet.
The signal is going to another AP1, also nanostation5 as client. The second AP1 is connected to router2(mikrotik rb532a, ROS) and from this mikrotik is going ethernet to nanostation2(AP2) which working as AP(the clients are connected to it). Till now I had ewerything bridged, but when client with worse connection quality(connected to AP2) was downloading, pings went pretty up(about 100ms and more), also when more people were downloading at the same time. Pings were high also on connection between
AP1 < -- > AP2, which has throughoutput about 20MBit(quality of signal -72, CCQ 80-90%). Connect which is going over air to clients is 8MBits.
I changet it, that router1+AP1 <---> AP1+router2 is bridged, and broadcast(AP2), all interfaces on router2 and all clients connecting to AP2 are routed. But still the same. Propably the only thing would be to route it everything, but in that case I lost possibility of connecting from pc connected to router1 to other parts of network. Can you help?
