View Full Version : xr2, sr2, r52?
rado3105
04-09-2009, 12:41 AM
Hi I am using r52s, but they seems to have limit max. 20 clients per one card. I would like to know about xr2 or sr2, which is better use for ap(point to multipoint), how many clients can be connected on one minipci? What about quality of link with r52?
skyhook
04-09-2009, 01:17 AM
Hi I am using r52s, but they seems to have limit max. 20 clients per one card. I would like to know about xr2 or sr2, which is better use for ap(point to multipoint), how many clients can be connected on one minipci? What about quality of link with r52?
You have tested R52?
Can you describe what happens?
rado3105
04-09-2009, 01:20 AM
pings are going up, the throughoutput of network is lower. Clients are reassociating(some not all) - when all clients are connected.
skyhook
04-09-2009, 01:23 AM
pings are going up, the throughoutput of network is lower. Clients are reassociating(some not all) - when all clients are connected.
What's aggregate (average) throughput from clients?
Can you post min and max distance from AP to clients?
2GHz or 5 GHz band?
Have you tried another radio module?
rado3105
04-09-2009, 01:31 AM
It is 2.4GHz, min. distance is 200m max 1200m. I also tryied cm9 and other r52s(in suspicion of defection). Max throughoutput seems to be 12Mbit. The throughput which is going over is max 6Mbit. The problem is that pings are high when throughoutput is only 2Mbit.
skyhook
04-09-2009, 01:54 AM
CM9 work fine with many clients?
What's CPEs models?
rado3105
04-09-2009, 02:41 AM
cm9 same as r52.
clients are: r52, cm9, nanostation2, WA2204, ovislink(realtek8186)
skyhook
04-09-2009, 03:07 AM
cm9 same as r52.
clients are: r52, cm9, nanostation2, WA2204, ovislink(realtek8186)
I tested many radio module (ubnt and other manufateurs) and work fine up to 30 clients.
Client are NS2 and some AP based on Realtek 8186.
Can you post more info on your network configuration?
Have you checked for interferences?
