tftp problem

[gony69]

hi,

i tried to put lugro-mesh on my new pico with tftp client
and i have NO RESPONSE FROM SERVER

i tried with bullet and nanostation and i have no problem

need help please

[WHT]

You may have to have the lugro-mesh people help you. UBNT only supports their AirOS.

[gony69]

the probleme is not lugro-mesh is picostation it can t accept tftp client
i tried with 2 pico same probleme
the question is why tftp client work with nano , bullet and can t work on pico

[UBNT-Mike.Ford]

Hey Gonya,

I tested this out in the lab and I can access the TFTP on Pico and Pico2. The switch is a little hard to tell if you are depressing it all the way. Please do the following:

Open a CMD prompt. Start ping 192.168.1.20

Next, unplug the device.

Hold the reset switch down then power the unit on. When you see the first succesfull ping let go of the switch.

If you hold it to long the unit reboots fairly quick.

Thanks,

Mike

[WHT]

Or ping x.x.x.x -t for more than the normal four attempts.

[gony69]

thanks Mike

i m try it tonight