RussellSenior
03-27-2009, 02:12 PM
The AirView2, when plugged into a usb port on a recent Linux shows up as: usb 2-2.4: New USB device found, idVendor=1f9b, idProduct=0241
usb 2-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-2.4: Product: AirView
usb 2-2.4: Manufacturer: Ubiquiti
usb 2-2.4: SerialNumber: 0123456789
usb 2-2.4: configuration #1 chosen from 1 choice
cdc_acm 2-2.4:1.0: This device cannot do calls on its own. It is no modem.
cdc_acm 2-2.4:1.0: ttyACM0: USB ACM device
That's (more or less) a kind of serial adapter. I could try talking to it over this more easily if I knew the speed and protocol. Any help?
usb 2-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-2.4: Product: AirView
usb 2-2.4: Manufacturer: Ubiquiti
usb 2-2.4: SerialNumber: 0123456789
usb 2-2.4: configuration #1 chosen from 1 choice
cdc_acm 2-2.4:1.0: This device cannot do calls on its own. It is no modem.
cdc_acm 2-2.4:1.0: ttyACM0: USB ACM device
That's (more or less) a kind of serial adapter. I could try talking to it over this more easily if I knew the speed and protocol. Any help?
