PDA

View Full Version : antenna & low loss cable for sr71a


PostornJ
03-18-2009, 01:23 AM
i'm novice for SR71A Model.

please advice me for antenna & low loss cable for SR71A

1. What type of antenna can use with SR71A? (Omni Only or any )

2. What type of low loss cable connector plug to SR71A? (MCX MALE ?)

3.How max length of low loss cable for SR71A?

Thank you

J_Hughes
03-22-2009, 10:34 AM
1. any 5ghz or 2.4ghz antennas (if you want to utilize the MIMO features you must use more than one antenna)

2. You must use:
| SR71A | mmcx pigtail with N-connector | Low loss cable (LMR400 or LMR600 recomended)

3. The more cable you use, the more loss of power you will recieve. The rate of loss depends on the frequency you choose and the quality of cable.
Two options for coax runs:
1 - Mount radios on ground, run LMR to antennas at top of tower - short power run
2 - Mount radios in waterproof enclosure at top of tower - long PoE run

PostornJ
03-22-2009, 06:49 PM
thank you :D

herymx
04-28-2009, 02:34 PM
Hi guys

I have doubt about this, to do ptp link mimo I need 1 SR71-15 and 2 antenna 5GHZ "Dish" ? It correct that?

And what mark of antenna recommend me?

Thanks :wink:

CzechEnglishFrenchGermanItalianPolishPortugueseRussianSpanish
Translations supported by vBET Translator 3.5.4