robertoveras_Dominicano
02-26-2009, 10:31 AM
Sorry for my ignorance.. but...
Is there any way to get remote control for NS2 from another network o site?
Thanks in advance.
granlabor
03-07-2009, 02:35 PM
You want to access the web server on the UBNT radio from outside the network you have to either:
1) Port forward the connection from the web to the radio. Check with your IT dept.
2) If you are using a simple firewall off the shelf place the UBNT radio IP on the DMZ. The firewall manual will show you how.
3) And last. If you are already inside the network you have to use the same IP range use by the UBNT radio. If you have multiple networks on the same link, make sure you use a NAT to communicate between different IP ranges.
Good Luck,
Joe Alves
robertoveras_Dominicano
03-07-2009, 02:42 PM
Gracias.
Intentare de esa forma y te dejare saber.
Gracias.
