freezer2k
02-26-2009, 04:32 AM
Hi,
Just got the RouterStation.
I flashed http://www.ubnt.com/downloads/RS/RSx.ar7100.OpenWRT.bin to it. Also tried the latest openwrt snapshot, with similar problems, but the log is from the ubnt.com image!
What I did:
I attached a 16GB Sandisk flashdrive to the USB-Port. The drive contains a ext3 FS and first everything seems fine (its been detected with right size etc.). Im able to mount the drive to /mnt/usb using the mount -t ext3 /dev/sda /mnt/usb command. I can see the lost+found dir there and did a 'touch test'
Shortly after that first errors came up (see log). So even small writing operations cause it to freeze/crash. Also tried to transfer a huge file over sftp ... but it stalled instantly.
Is this problem known? Any ideas how to fix it? Anyone is succesfully using USB, whats your setup?
Thanks in advance,
Freezer
The Log:
usb 1-1: new high speed USB device using ar71xx-ehci and address 2
usb 1-1: configuration #1 chosen from 1 choice
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
scsi 0:0:0:0: Direct-Access SanDisk Cruzer 8.02 PQ: 0 ANSI: 0 CCS
sd 0:0:0:0: [sda] 31301631 512-byte hardware sectors (16026 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 45 00 00 08
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] 31301631 512-byte hardware sectors (16026 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 45 00 00 08
sd 0:0:0:0: [sda] Assuming drive cache: write through
sda: unknown partition table
sd 0:0:0:0: [sda] Attached SCSI removable disk
scsi 0:0:0:1: CD-ROM SanDisk Cruzer 8.02 PQ: 0 ANSI: 0
usb-storage: device scan complete
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
usb 1-1: reset high speed USB device using ar71xx-ehci and address 2
usb 1-1: device descriptor read/64, error -145
usb 1-1: device descriptor read/64, error -145
usb 1-1: reset high speed USB device using ar71xx-ehci and address 2
usb 1-1: device descriptor read/64, error -145
usb 1-1: device descriptor read/64, error -145
usb 1-1: reset high speed USB device using ar71xx-ehci and address 2
usb 1-1: device descriptor read/8, error -145
usb 1-1: device descriptor read/8, error -145
usb 1-1: reset high speed USB device using ar71xx-ehci and address 2
usb 1-1: device descriptor read/8, error -145
usb 1-1: device descriptor read/8, error -145
sd 0:0:0:0: Device offlined - not ready after error recovery
sd 0:0:0:0: [sda] Result: hostbyte=0x05 driverbyte=0x00
end_request: I/O error, dev sda, sector 8
Buffer I/O error on device sda, logical block 1
lost page write due to I/O error on sda
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
Buffer I/O error on device sda, logical block 1469
lost page write due to I/O error on sda
sd 0:0:0:0: [sda] Result: hostbyte=0x01 driverbyte=0x00
end_request: I/O error, dev sda, sector 7664
Buffer I/O error on device sda, logical block 958
lost page write due to I/O error on sda
Buffer I/O error on device sda, logical block 959
lost page write due to I/O error on sda
usb 1-1: USB disconnect, address 2
usb 1-1: new high speed USB device using ar71xx-ehci and address 3
usb 1-1: device descriptor read/64, error -145
usb 1-1: device descriptor read/64, error -145
usb 1-1: new high speed USB device using ar71xx-ehci and address 4
EXT3-fs error (device sda): ext3_get_inode_loc: unable to read inode block - inode=2, block=959
Buffer I/O error on device sda, logical block 0
lost page write due to I/O error on sda
EXT3-fs error (device sda) in ext3_reserve_inode_write: IO failure
------------[ cut here ]------------
WARNING: at fs/buffer.c:1186 ()
Modules linked in: fuse pl2303 ark3116 gpio_buttons input_polldev usb_storage usbserial snd_usb_audio snd_usb_lib ohci_hcd ath_pci wlan_xauth wlan_wep wlan_tkip wlan_ccmp wlan_acl ath_rate_minstrel ath_hal(P) wlan_scan_sta wlan_scan_ap wlan input_core ip6t_REJECT ip6t_LOG ip6t_IMQ ip6t_HL ip6t_rt ip6t_hbh ip6t_mh ip6t_ipv6header ip6t_hl ip6t_frag ip6t_eui64 ip6t_ah ip6table_raw ip6table_mangle ip6table_filter ip6_tables nf_conntrack_ipv6 ebt_vlan ebt_ulog ebt_stp ebt_snat ebt_redirect ebt_pkttype ebt_nflog ebt_mark_m ebt_mark ebt_log ebt_limit ebt_ip ebt_dnat ebt_arpreply ebt_arp ebt_among ebt_802_3 ebtable_nat ebtable_filter ebtable_broute ebtables nf_nat_snmp_basic nf_nat_sip nf_conntrack_sip nf_nat_rtsp nf_conntrack_rtsp nf_nat_pptp nf_conntrack_pptp nf_nat_h323 nf_conntrack_h323 nf_nat_proto_gre nf_conntrack_proto_gre nf_nat_tftp nf_conntrack_tftp nf_nat_irc nf_conntrack_irc nf_nat_ftp nf_conntrack_ftp xt_policy xt_esp ipt_ah ipt_TTL xt_MARK ipt_ECN xt_CLASSIFY ipt_ttl xt_time ipt_time xt_tcpmss xt_statistic xt_mark xt_length ipt_ecn xt_DSCP xt_dscp ipt_IMQ imq xt_string xt_layer7 ipt_ipp2p ipt_MASQUERADE iptable_nat nf_nat xt_NOTRACK xt_CONNMARK ipt_recent xt_helper xt_conntrack xt_connmark xt_connbytes xt_state nf_conntrack_ipv4 nf_conntrack ehci_hcd sd_mod ipt_REJECT xt_TCPMSS ipt_LOG xt_multiport xt_mac xt_limit iptable_mangle iptable_filter ip_tables xt_tcpudp x_tables gpio_dev bonding sit ip6_tunnel ppp_mppe tunnel6 tunnel4 tun snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd_rawmidi snd_seq_device snd_hwdep snd_page_alloc snd soundcore ppp_async ppp_generic slhc vfat fat ntfs hfsplus ext3 jbd ext2 ath9k nls_utf8 nls_koi8_r nls_iso8859_2 nls_iso8859_15 nls_iso8859_1 nls_cp850 nls_cp437 nls_cp1251 nls_cp1250 usbcore scsi_mod nls_base mac80211 cfg80211 ipv6 crc_ccitt sha1_generic md5 hmac des_generic arc4 aes_generic deflate ecb cbc crypto_hash cryptomgr crypto_blkcipher aead crypto_algapi
Call Trace:[<80066b24>][<80066b24>][<8007f444>][<80180e2c>][<8014ab8c>][<80180e2c>][<8017aa38>][<800abfd0>][<8007c5c4>][<80079438>][<80079438>][<8017fe6c>][<800794fc>][<8007c5c4>][<8007f5f0>][<802274a4>][<8007fbdc>][<800da050>][<8007bf38>][<80080234>][<8022764c>][<800f6620>][<800f2a40>][<c01f1894>][<c01f1878>][<80080268>][<c01f2678>][<c01f265c>][<c01f2524>][<8008028c>][<c01e7fd0>][<c01e7fc0>][<c01f25f0>][<c01f25c0>][<800da050>][<c01e80dc>][<c01e8074>][<800d40e8>][<c01e812c>][<800da050>][<c015f188>][<c01e5794>][<c01ebf3c>][<800edde8>][<800e2fcc>][<800da43c>][<800da418>][<800da050>][<800da4ec>][<800cdc48>][<800bde18>][<80068304>]
---[ end trace 49dcdf8557ef9fd4 ]---
Buffer I/O error on device sda, logical block 0
lost page write due to I/O error on sda
EXT3-fs error (device sda): ext3_get_inode_loc: unable to read inode block - inode=2, block=959
Buffer I/O error on device sda, logical block 0
lost page write due to I/O error on sda
EXT3-fs error (device sda) in ext3_reserve_inode_write: IO failure
Buffer I/O error on device sda, logical block 0
lost page write due to I/O error on sda
EXT3-fs error (device sda): ext3_get_inode_loc: unable to read inode block - inode=2, block=959
Buffer I/O error on device sda, logical block 0
lost page write due to I/O error on sda
EXT3-fs error (device sda) in ext3_reserve_inode_write: IO failure
Buffer I/O error on device sda, logical block 0
lost page write due to I/O error on sda
EXT3-fs error (device sda): ext3_get_inode_loc: unable to read inode block - inode=2, block=959
Buffer I/O error on device sda, logical block 0
lost page write due to I/O error on sda
EXT3-fs error (device sda) in ext3_reserve_inode_write: IO failure
Buffer I/O error on device sda, logical block 0
lost page write due to I/O error on sda
Buffer I/O error on device sda, logical block 1901063
lost page write due to I/O error on sda
Aborting journal on device sda.
Buffer I/O error on device sda, logical block 1901056
lost page write due to I/O error on sda
usb 1-1: device descriptor read/64, error -145
ext3_abort called.
EXT3-fs error (device sda): ext3_journal_start_sb: Detected aborted journal
Remounting filesystem read-only
usb 1-1: device descriptor read/64, error -145
usb 1-1: new high speed USB device using ar71xx-ehci and address 5
usb 1-1: device descriptor read/8, error -145
usb 1-1: device descriptor read/8, error -145
usb 1-1: new high speed USB device using ar71xx-ehci and address 6
usb 1-1: device descriptor read/8, error -145
usb 1-1: device descriptor read/8, error -145
hub 1-0:1.0: unable to enumerate USB device on port 1
usb 2-1: new full speed USB device using ar71xx-ohci and address 2
usb 2-1: device descriptor read/64, error -145
usb 2-1: device descriptor read/64, error -145
usb 2-1: new full speed USB device using ar71xx-ohci and address 3
Buffer I/O error on device sda, logical block 1901056
lost page write due to I/O error on sda
scsi 0:0:0:0: rejecting I/O to dead device
usb 2-1: device descriptor read/64, error -145
usb 2-1: device descriptor read/64, error -145
usb 2-1: new full speed USB device using ar71xx-ohci and address 4
usb 2-1: device descriptor read/8, error -145
usb 2-1: device descriptor read/8, error -145
usb 2-1: new full speed USB device using ar71xx-ohci and address 5
usb 2-1: device descriptor read/8, error -145
usb 2-1: device descriptor read/8, error -62
hub 2-0:1.0: unable to enumerate USB device on port 1
usb 1-1: new high speed USB device using ar71xx-ehci and address 7
usb 1-1: configuration #1 chosen from 1 choice
scsi1 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 7
usb-storage: waiting for device to settle before scanning
scsi 1:0:0:0: Direct-Access SanDisk Cruzer 8.02 PQ: 0 ANSI: 0 CCS
sd 1:0:0:0: [sda] 31301631 512-byte hardware sectors (16026 MB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 45 00 00 08
sd 1:0:0:0: [sda] Assuming drive cache: write through
sd 1:0:0:0: [sda] 31301631 512-byte hardware sectors (16026 MB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 45 00 00 08
sd 1:0:0:0: [sda] Assuming drive cache: write through
sda: unknown partition table
sd 1:0:0:0: [sda] Attached SCSI removable disk
scsi 1:0:0:1: CD-ROM SanDisk Cruzer 8.02 PQ: 0 ANSI: 0
usb-storage: device scan complete
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
usb 1-1: reset high speed USB device using ar71xx-ehci and address 7
usb 1-1: device descriptor read/64, error -145
usb 1-1: device descriptor read/64, error -145
usb 1-1: reset high speed USB device using ar71xx-ehci and address 7
Just got the RouterStation.
I flashed http://www.ubnt.com/downloads/RS/RSx.ar7100.OpenWRT.bin to it. Also tried the latest openwrt snapshot, with similar problems, but the log is from the ubnt.com image!
What I did:
I attached a 16GB Sandisk flashdrive to the USB-Port. The drive contains a ext3 FS and first everything seems fine (its been detected with right size etc.). Im able to mount the drive to /mnt/usb using the mount -t ext3 /dev/sda /mnt/usb command. I can see the lost+found dir there and did a 'touch test'
Shortly after that first errors came up (see log). So even small writing operations cause it to freeze/crash. Also tried to transfer a huge file over sftp ... but it stalled instantly.
Is this problem known? Any ideas how to fix it? Anyone is succesfully using USB, whats your setup?
Thanks in advance,
Freezer
The Log:
usb 1-1: new high speed USB device using ar71xx-ehci and address 2
usb 1-1: configuration #1 chosen from 1 choice
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
scsi 0:0:0:0: Direct-Access SanDisk Cruzer 8.02 PQ: 0 ANSI: 0 CCS
sd 0:0:0:0: [sda] 31301631 512-byte hardware sectors (16026 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 45 00 00 08
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] 31301631 512-byte hardware sectors (16026 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 45 00 00 08
sd 0:0:0:0: [sda] Assuming drive cache: write through
sda: unknown partition table
sd 0:0:0:0: [sda] Attached SCSI removable disk
scsi 0:0:0:1: CD-ROM SanDisk Cruzer 8.02 PQ: 0 ANSI: 0
usb-storage: device scan complete
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
usb 1-1: reset high speed USB device using ar71xx-ehci and address 2
usb 1-1: device descriptor read/64, error -145
usb 1-1: device descriptor read/64, error -145
usb 1-1: reset high speed USB device using ar71xx-ehci and address 2
usb 1-1: device descriptor read/64, error -145
usb 1-1: device descriptor read/64, error -145
usb 1-1: reset high speed USB device using ar71xx-ehci and address 2
usb 1-1: device descriptor read/8, error -145
usb 1-1: device descriptor read/8, error -145
usb 1-1: reset high speed USB device using ar71xx-ehci and address 2
usb 1-1: device descriptor read/8, error -145
usb 1-1: device descriptor read/8, error -145
sd 0:0:0:0: Device offlined - not ready after error recovery
sd 0:0:0:0: [sda] Result: hostbyte=0x05 driverbyte=0x00
end_request: I/O error, dev sda, sector 8
Buffer I/O error on device sda, logical block 1
lost page write due to I/O error on sda
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: rejecting I/O to offline device
Buffer I/O error on device sda, logical block 1469
lost page write due to I/O error on sda
sd 0:0:0:0: [sda] Result: hostbyte=0x01 driverbyte=0x00
end_request: I/O error, dev sda, sector 7664
Buffer I/O error on device sda, logical block 958
lost page write due to I/O error on sda
Buffer I/O error on device sda, logical block 959
lost page write due to I/O error on sda
usb 1-1: USB disconnect, address 2
usb 1-1: new high speed USB device using ar71xx-ehci and address 3
usb 1-1: device descriptor read/64, error -145
usb 1-1: device descriptor read/64, error -145
usb 1-1: new high speed USB device using ar71xx-ehci and address 4
EXT3-fs error (device sda): ext3_get_inode_loc: unable to read inode block - inode=2, block=959
Buffer I/O error on device sda, logical block 0
lost page write due to I/O error on sda
EXT3-fs error (device sda) in ext3_reserve_inode_write: IO failure
------------[ cut here ]------------
WARNING: at fs/buffer.c:1186 ()
Modules linked in: fuse pl2303 ark3116 gpio_buttons input_polldev usb_storage usbserial snd_usb_audio snd_usb_lib ohci_hcd ath_pci wlan_xauth wlan_wep wlan_tkip wlan_ccmp wlan_acl ath_rate_minstrel ath_hal(P) wlan_scan_sta wlan_scan_ap wlan input_core ip6t_REJECT ip6t_LOG ip6t_IMQ ip6t_HL ip6t_rt ip6t_hbh ip6t_mh ip6t_ipv6header ip6t_hl ip6t_frag ip6t_eui64 ip6t_ah ip6table_raw ip6table_mangle ip6table_filter ip6_tables nf_conntrack_ipv6 ebt_vlan ebt_ulog ebt_stp ebt_snat ebt_redirect ebt_pkttype ebt_nflog ebt_mark_m ebt_mark ebt_log ebt_limit ebt_ip ebt_dnat ebt_arpreply ebt_arp ebt_among ebt_802_3 ebtable_nat ebtable_filter ebtable_broute ebtables nf_nat_snmp_basic nf_nat_sip nf_conntrack_sip nf_nat_rtsp nf_conntrack_rtsp nf_nat_pptp nf_conntrack_pptp nf_nat_h323 nf_conntrack_h323 nf_nat_proto_gre nf_conntrack_proto_gre nf_nat_tftp nf_conntrack_tftp nf_nat_irc nf_conntrack_irc nf_nat_ftp nf_conntrack_ftp xt_policy xt_esp ipt_ah ipt_TTL xt_MARK ipt_ECN xt_CLASSIFY ipt_ttl xt_time ipt_time xt_tcpmss xt_statistic xt_mark xt_length ipt_ecn xt_DSCP xt_dscp ipt_IMQ imq xt_string xt_layer7 ipt_ipp2p ipt_MASQUERADE iptable_nat nf_nat xt_NOTRACK xt_CONNMARK ipt_recent xt_helper xt_conntrack xt_connmark xt_connbytes xt_state nf_conntrack_ipv4 nf_conntrack ehci_hcd sd_mod ipt_REJECT xt_TCPMSS ipt_LOG xt_multiport xt_mac xt_limit iptable_mangle iptable_filter ip_tables xt_tcpudp x_tables gpio_dev bonding sit ip6_tunnel ppp_mppe tunnel6 tunnel4 tun snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd_rawmidi snd_seq_device snd_hwdep snd_page_alloc snd soundcore ppp_async ppp_generic slhc vfat fat ntfs hfsplus ext3 jbd ext2 ath9k nls_utf8 nls_koi8_r nls_iso8859_2 nls_iso8859_15 nls_iso8859_1 nls_cp850 nls_cp437 nls_cp1251 nls_cp1250 usbcore scsi_mod nls_base mac80211 cfg80211 ipv6 crc_ccitt sha1_generic md5 hmac des_generic arc4 aes_generic deflate ecb cbc crypto_hash cryptomgr crypto_blkcipher aead crypto_algapi
Call Trace:[<80066b24>][<80066b24>][<8007f444>][<80180e2c>][<8014ab8c>][<80180e2c>][<8017aa38>][<800abfd0>][<8007c5c4>][<80079438>][<80079438>][<8017fe6c>][<800794fc>][<8007c5c4>][<8007f5f0>][<802274a4>][<8007fbdc>][<800da050>][<8007bf38>][<80080234>][<8022764c>][<800f6620>][<800f2a40>][<c01f1894>][<c01f1878>][<80080268>][<c01f2678>][<c01f265c>][<c01f2524>][<8008028c>][<c01e7fd0>][<c01e7fc0>][<c01f25f0>][<c01f25c0>][<800da050>][<c01e80dc>][<c01e8074>][<800d40e8>][<c01e812c>][<800da050>][<c015f188>][<c01e5794>][<c01ebf3c>][<800edde8>][<800e2fcc>][<800da43c>][<800da418>][<800da050>][<800da4ec>][<800cdc48>][<800bde18>][<80068304>]
---[ end trace 49dcdf8557ef9fd4 ]---
Buffer I/O error on device sda, logical block 0
lost page write due to I/O error on sda
EXT3-fs error (device sda): ext3_get_inode_loc: unable to read inode block - inode=2, block=959
Buffer I/O error on device sda, logical block 0
lost page write due to I/O error on sda
EXT3-fs error (device sda) in ext3_reserve_inode_write: IO failure
Buffer I/O error on device sda, logical block 0
lost page write due to I/O error on sda
EXT3-fs error (device sda): ext3_get_inode_loc: unable to read inode block - inode=2, block=959
Buffer I/O error on device sda, logical block 0
lost page write due to I/O error on sda
EXT3-fs error (device sda) in ext3_reserve_inode_write: IO failure
Buffer I/O error on device sda, logical block 0
lost page write due to I/O error on sda
EXT3-fs error (device sda): ext3_get_inode_loc: unable to read inode block - inode=2, block=959
Buffer I/O error on device sda, logical block 0
lost page write due to I/O error on sda
EXT3-fs error (device sda) in ext3_reserve_inode_write: IO failure
Buffer I/O error on device sda, logical block 0
lost page write due to I/O error on sda
Buffer I/O error on device sda, logical block 1901063
lost page write due to I/O error on sda
Aborting journal on device sda.
Buffer I/O error on device sda, logical block 1901056
lost page write due to I/O error on sda
usb 1-1: device descriptor read/64, error -145
ext3_abort called.
EXT3-fs error (device sda): ext3_journal_start_sb: Detected aborted journal
Remounting filesystem read-only
usb 1-1: device descriptor read/64, error -145
usb 1-1: new high speed USB device using ar71xx-ehci and address 5
usb 1-1: device descriptor read/8, error -145
usb 1-1: device descriptor read/8, error -145
usb 1-1: new high speed USB device using ar71xx-ehci and address 6
usb 1-1: device descriptor read/8, error -145
usb 1-1: device descriptor read/8, error -145
hub 1-0:1.0: unable to enumerate USB device on port 1
usb 2-1: new full speed USB device using ar71xx-ohci and address 2
usb 2-1: device descriptor read/64, error -145
usb 2-1: device descriptor read/64, error -145
usb 2-1: new full speed USB device using ar71xx-ohci and address 3
Buffer I/O error on device sda, logical block 1901056
lost page write due to I/O error on sda
scsi 0:0:0:0: rejecting I/O to dead device
usb 2-1: device descriptor read/64, error -145
usb 2-1: device descriptor read/64, error -145
usb 2-1: new full speed USB device using ar71xx-ohci and address 4
usb 2-1: device descriptor read/8, error -145
usb 2-1: device descriptor read/8, error -145
usb 2-1: new full speed USB device using ar71xx-ohci and address 5
usb 2-1: device descriptor read/8, error -145
usb 2-1: device descriptor read/8, error -62
hub 2-0:1.0: unable to enumerate USB device on port 1
usb 1-1: new high speed USB device using ar71xx-ehci and address 7
usb 1-1: configuration #1 chosen from 1 choice
scsi1 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 7
usb-storage: waiting for device to settle before scanning
scsi 1:0:0:0: Direct-Access SanDisk Cruzer 8.02 PQ: 0 ANSI: 0 CCS
sd 1:0:0:0: [sda] 31301631 512-byte hardware sectors (16026 MB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 45 00 00 08
sd 1:0:0:0: [sda] Assuming drive cache: write through
sd 1:0:0:0: [sda] 31301631 512-byte hardware sectors (16026 MB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 45 00 00 08
sd 1:0:0:0: [sda] Assuming drive cache: write through
sda: unknown partition table
sd 1:0:0:0: [sda] Attached SCSI removable disk
scsi 1:0:0:1: CD-ROM SanDisk Cruzer 8.02 PQ: 0 ANSI: 0
usb-storage: device scan complete
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
usb 1-1: reset high speed USB device using ar71xx-ehci and address 7
usb 1-1: device descriptor read/64, error -145
usb 1-1: device descriptor read/64, error -145
usb 1-1: reset high speed USB device using ar71xx-ehci and address 7
