View Full Version : Nanostation 5 or 2 - external antenna problem
janmoravek
03-19-2008, 11:14 AM
Hi,
i testing nanostation2 and 5 and with both, when i connect to RSMA external antenna and set antenna to external, the signal is always poor and worst then internal.
Have anyone has any experience with these settings?
Thanks for answer.
JM
UBNT-Mike.Ford
03-19-2008, 11:33 AM
Hello Janmoravek,
Can you give me the specifications that you are using for the eternal antenna?
Thank you,
Mike
janmoravek
03-19-2008, 12:24 PM
Hello Janmoravek,
Can you give me the specifications that you are using for the eternal antenna?
Thank you,
Mike
Hi,
pigtail RSMA-N, 2 meters, 14 dbi antena, set in radio, external antena, that the signal is worst then internal. Tested more antennas. Same nano2 and nano5. (for nano5 19dbi).
Again AP with 17dbi, 90 degress.
When i deattach antenna is the same level in site survey.
Can we discuss this problem via email or phone?
cz_ranger
03-19-2008, 01:34 PM
Hi,
if your pigtail really is N-RSMA, then try looking at the antenna connector (RTFM) - it is NOT RSMA, but SMA. Technically the RSMA pigtail can be screwed on it, but you have no connection on center pin => poor signal.
HTH, Tom
janmoravek
03-19-2008, 01:52 PM
Hi,
if your pigtail really is N-RSMA, then try looking at the antenna connector (RTFM) - it is NOT RSMA, but SMA. Technically the RSMA pigtail can be screwed on it, but you have no connection on center pin => poor signal.
HTH, Tom
this http://wifi.aspa.cz/zbozi.php?detail=18433
cz_ranger
03-19-2008, 02:37 PM
Yes, that combination is NOT going to work. You need something like:
http://www.intelek.cz/product.jsp?artno=73919401
or
http://www.icq.cz/?Mode=Sti&StiId=27022
Check out the difference here:
http://en.wikipedia.org/wiki/SMA_connector
janmoravek
03-19-2008, 02:47 PM
Yes, that combination is NOT going to work. You need something like:
http://www.intelek.cz/product.jsp?artno=73919401
or
http://www.icq.cz/?Mode=Sti&StiId=27022
Check out the difference here:
http://en.wikipedia.org/wiki/SMA_connector
great, i already got it.
thanks
solved
silentservice
12-24-2008, 05:08 PM
Hello Janmoravek,
Can you give me the specifications that you are using for the eternal antenna?
Thank you,
Mike
You can check the pigtail. Pigtail must be sma-male to N-Male