SRC semms not work on windows XP Professional SP2

[ciko]

Hi,
i have some installation problem with SRC 300mw 802.11 a/b/g MMCX. The card seems do not work. My Alienware laptop configuration is:
window XP Professional version 2002 SP2
i download and install mobility_driver_7.7.exe
I follow the normal step to install the card but when i start the client it don't find any card and i can't use the network.
Any suggest?
Thank you

[UBNT-Mike.Ford]

Hello Ciko,

Please test on a different laptop as the card will operate under Xp SP2 without issues. There may be a driver conflict.

Thanks,

Mike

[cwong]

I had the same issue with my Embedded Standard, which is really a stripped down version of XP. I found the following problem and have it work now.
Go to Control Panel, Administratives Tool, Services and make sure Ubiquiti Configuration Service is started. If not, try starting it manually.
I discovered that I had a couple missing dll files.
I ran Dependence Walker on acs.exe and discovered the missing dll.

[ciko]

Hi,
i have tried to install the driver through the control panel but this error appear on the screen :
"There was a problem installing this hardware :
Ubiquiti Network SRC Wireless Network Adapter
An error occurred during the application of the device
Access is denied"
Any suggestion will be appreciate,
thanks a lot,
Ciko

[cwong]

I though you already installed the driver as you mentioned on your first post. Are you re-installing the driver here?
If you're, make sure you have the SRC card inserted and completely uninstall the driver first. I was able to get it to work either installing from Mobility_Driver_7.7.exe or plane driver netsrx.inf through control panel.
Be honest to you, I think it works better with WZC disabled from the service.

Good luck.