Bullet2 Conatantly rebooting

[ecarey]

Hi,

I recently bought a pair of bullet2s to test. One of them, straight out of the box constantly reboots. I have not connected this to any dish or antenna. I simply plugged in the poe and left it running on the bench. It reboots every few minutes. The second one with the same power supply has run successfully with a reboot for 2 days.

I have tried both 12 and 24v power supplies and at the moment I am using the 12v 1a power supply from a nanostation.

Is there something I should be checking here or is this simply a defective module?

Thanks
Eamonn...

[UBNT-Mike.Ford]

Hello Ecarey,

How long after plugging it in does it reboot? Also for an RMA please email me at mike@ubnt.com

Thanks,

Mike

[ecarey]

Hi Mike,

It usually reboots the first time within 3-5 minutes of being plugged in and will continue to reboot on a similar interval thereafter.

Thanks
Eamonn...

[WHT]

Does it still do it with nothing plugged into the LAN port?

[ecarey]

Yes, I have left it for long periods and when I come back to it it will only be up a few minutes. I have it dumping out to a syslog server at the moment to see if I can capture anything just before it reboots to tell me why, but there it never logs anything, all I get is the boot messages.

[WHT]

Not a good sign, RMA the puppy.

[Kyjin]

just curious but what do you have the IP watchdog setting at?

[ecarey]

The watchdog would have been switched off. This was fresh out of the box.