Low Signal in PS2

[tshaarawy]

Dear All;
I am installing new PS2 link and there is line of sight, but the thing is it is showing very bad signal strength, and so is the ccq value, best signal I got is -78 but it goes up to -81 on average, and ccq value is 1% or even less than this, and the Tx value is 1 or 2 or 6 Mps maximum, i tried all the channels, from 1 to 13, no better result I got. Could you advice please?

[WHT]

Since you're seeing the same results on all channels, it sort of rules out interference. Try reversing the link - change the current AP to Station and current Station to AP and see if the link quality is the same. You need to define the boundaries of the problem.

[UBNT-Mike.Ford]

Also,

What distance are you at?

Thanks,

Mike

[tshaarawy]

THE DISTANCE IS 6 KM ONLY. I WILL TRY TO CHANGE THE LINK AP AND STATION.

[UBNT-Mike.Ford]

Hello,

Any updates?

Thanks,

Mike