PDA

View Full Version : Power station locked up? "System is busy now. Please re


mohave_steve
12-24-2008, 01:22 PM
I just threw my first PS5 up on the bench and was poking around the config pages and received the message:

"System is busy now. Please refresh the page after a while.. "

I know that with it sitting here on the bench I can cycle power or press the reset button. But assume that this unit was up on a tower somewhere, how can I reboot the unit ??

I can access & refresh the main page but all of the other pages yield the same error.

Is this behavior typical on the PS5s?

Thanks

WHT
12-24-2008, 03:09 PM
Watchdog ping

mohave_steve
12-25-2008, 04:04 PM
I did not loose network connectivity. it was still passing traffic and I could still connect to the unit and view the status page. The problem was that the other config pages yielded the error. I left it in that state for about an hour to see if it would clear on its own. It didn't, so I cycled power and tried to duplicate the failure and couldn't.

UBNT-Mike.Ford
12-29-2008, 11:22 AM
Hey Mohave,

What version of the firmware were you running?

Thanks,

Mike

CzechEnglishFrenchGermanItalianPolishPortugueseRussianSpanish
Translated to other languages supported by vBET Translator 3.5.4