PDA

View Full Version : Inside PS is LS?


nalicegates
12-14-2008, 07:55 PM
is it true inside the PowerStation is LiteStation?

i'm having this sligth technical problem, i bougth new PS from a vendor with a great deal it was..

but when i'm trying it on the power led is on but the lan led is just blinking for one or to time and then its off, beside that the wan led is on..

i've never deal with this kind of problem in PS..

can someone give me a clue what happend to this device?

WHT
12-14-2008, 08:19 PM
Where does the LiteStation enter the picture?

I don't use the PS, but if its like the Nanostation, Nano-Loco, and Bullet...there isn't any WAN lights. I suspect you mean the third light from the left which is the first of four signal level lights and is the lowest level signal indicator step.

If the LAN light is off after several seconds (it flashes on boot up and may even flash once or twice when a patch cable is physically plugged into the LAN port of the PoE power injector - even though the other end of the patch cable is not connected to anything)...you don't have a LAN connection.

Depending on your network activity - it may look like its always on, flash intermittently, or flash very fast at a steady rate (not a good sigh as it might indicate a network loop).

UBNT-Mike.Ford
12-15-2008, 11:35 AM
Hello Nalic,

Can you ping the unit on 192.168.1.20?

Thanks,

Mike

CzechEnglishFrenchGermanItalianPolishPortugueseRussianSpanish
Translations made by vBET 3.5.4