PDA

View Full Version : XR3-3.7 Max Recieve Signal


kd7gab
12-08-2008, 05:13 PM
All,

Does anyone know the maximum receive power that the XR3 can handle is?

I can't seem to raise anyone on the support phone line.

Thanks,

Jon

UBNT-Mike.Ford
12-08-2008, 05:47 PM
Hello John,

I do apologize I had called earlier but an answering machine did not pick up after I was transferred.

I would not run the unit higher then 0dB. For a 100% stable link I would recommend a signal in the -40's or lower for it to not over-saturate the receiver.

Thanks,

Mike

kd7gab
12-09-2008, 08:33 AM
Mike,

Thanks for the info, can you provide me with information on the dynamic range of the transmit section? Specifically, what is the minimum output from the radio?

Thanks,
Jon

UBNT-Robert
12-14-2008, 01:15 PM
Hi Jon,

TX dynamic range is about 20dB. So 5dBm min.; 25dBm maximum.

CzechEnglishFrenchGermanItalianPolishPortugueseRussianSpanish
Languages translations made by vBET 3.5.4