Web UI in Discovery tool

[Freedom-WIFI]

I keep getting page cannot be displayed no matter what I do. I would like to be able to remote into the Ubiquiti N2.

[WHT]

The Discovery tool is IP agnostic...it will still show a UNBT on the network regardless of the IP address.

If your computer has an IP addy of say...192.168.0.xx or 192.168.2.xx, then you won't be able to connect to the radio's 192.168.1.20 addy. Temporary change the IP of your computer to static 192.168.1.99, then change the radio IP to 192.168.xx.20.

Let us know if that works.

Also...you need to have the latest Java update. There's an off chance that your Java is up to date enough to open the tool, but not updated enough for the tool to open a browser. Just a thought, I could be wrong.

[guidonet]

Be sure to set you PC in 192.168.1.x range and try this link
http://192.168.1.20/system.cgi

[WHT]

The Discovery tool is IP agnostic...it will still show a UNBT on the network regardless of the IP address.

If your computer has an IP addy of say...192.168.0.xx or 192.168.2.xx,

Clarification........

The Discovery tool will discovery and display the UBNT units, but if the unit is on a different network setting - the "connect with web GUI" won't connect.

[UBNT-Mike.Ford]

Hello Freedom,

Have you been able to get into the unit with the above suggestions.

Thanks,

Mike

[Freedom-WIFI]

Sorry for the huge delay. That did work my partner was able to get it woking based on the information provided. I was wondering if there was a way to remote into them from off the network like we can with the Miktotik using a vpn.

[UBNT-Mike.Ford]

Thanks for the update.

Mike