dubelt
11-15-2008, 11:25 AM
hi,
I have NS2 running as router+nat,dhcp &pppoe auth. on wan-wlan card
I've checked the Enable DMZ.
Than I've applied an ip address of host in field DMZ IP. ip addr from local, LAN class/dhcp leases 10.10.0.7
after that, I've applied all settings.
checkbox called DMZ Management Port remained enabled/checked.
unfortunatelly I've no longer access to the NS2 via pppoe/WAN ip address :( and I am not certain how the DMZ Management Port works. Device is logged in wirelessly and via pppoe connection.
I assumed that it should still give me access from WAN side of NS2.
unfortunately, telnet/ssh is disabled and only port 80 was enabled as one to access the NS2. I thought that the management port will stil remain 80 :| and there won't be situation like that :(
does anyone have any idea how to access the NS2 device without 15km trip to place of its instalation place? :|
I have NS2 running as router+nat,dhcp &pppoe auth. on wan-wlan card
I've checked the Enable DMZ.
Than I've applied an ip address of host in field DMZ IP. ip addr from local, LAN class/dhcp leases 10.10.0.7
after that, I've applied all settings.
checkbox called DMZ Management Port remained enabled/checked.
unfortunatelly I've no longer access to the NS2 via pppoe/WAN ip address :( and I am not certain how the DMZ Management Port works. Device is logged in wirelessly and via pppoe connection.
I assumed that it should still give me access from WAN side of NS2.
unfortunately, telnet/ssh is disabled and only port 80 was enabled as one to access the NS2. I thought that the management port will stil remain 80 :| and there won't be situation like that :(
does anyone have any idea how to access the NS2 device without 15km trip to place of its instalation place? :|
