SRC is not working corectly

[p0larized]

This SRC is not performing like it should. For example at my home it will detect only 2 wifi networks. When I put in an old Prism2, Orinocco Gold, or my SRX dozens of networks will show up. I'm using the same antenna on the same computer. Only the closer WiFi networks will show up leading me to believe there is something wrong with the antenna jacks on it.

I hope someone from Ubiquiti can respond to this, as I've already tried the basics like installing and reinstalling the hardware/driver, tried on another machine etc...This was my favorite card :(


Edit:
One question. After playing with the settings that control the driver/chipset; advanced tab of adapter configuration applet it seems to be working a little better. Could someone post a clear explanation of what the antenna diversity settings actually do? I'm guessing it will disable/enable the antenna jacks?

There is one other possible reason it could be performing so poorly. I'm building a WinXP install to test. Any input would be welcome.

[UBNT-Mike.Ford]

Hello Polarized,

Asking my software team to jump in here.

Thanks,

Mike

[UBNT-Mike.Taylor]

Antenna diversity controls which antennas are used. For transmit and receive you can specify which antenna is used OR use 'diversity' which will alternate which antenna is used for transmission, and use the strongest antenna automatically for packet reception.

Please refer to the wiki or user manual for more information.