View Full Version : Bullet5 max throughput
Hi,
Is there any estimate/lab measurement (TCP and/or UDP) regarding
the maximum throughput (RF to ethernet)
Thanks,
Laz.
UBNT says their testing shows 24 Mbps.
Thanks for the quick reply.
kijoma
10-31-2008, 11:32 AM
hi,
guess same cpu as other radios so 27.9mbps max tcp in turbo, about 45mbps udp.
guess same cpu as other radios so 27.9mbps max tcp in turbo, about 45mbps udp.
That sounds very promising...Not bad at all :-) :-)
UBNT-Mike.Ford
11-03-2008, 12:56 PM
Hey Guys,
Standard 20Mhz channel, i see 25.13Mbps in a clean noise free enviroment.
Thanks,
Mike
jsuter
12-22-2008, 02:35 PM
Hey Guys,
Standard 20Mhz channel, i see 25.13Mbps in a clean noise free enviroment.
Thanks,
Mike
How fast at 40 mhz with the bullet5, locked 54/108mbit with good signal, bridged, all tweaks enabled?
How many PPS can it handle over the wireless interface, with, say, 128 byte packets?
rconaway
12-22-2008, 04:48 PM
We tested between 25 and 26Mbps while running SNMP and 33Mbps in turbo mode. SNMP however, became an afterthough to the processor at that throughput. The little hamster couldn't run any faster.