Please post your config files with every request!

[UBNT-Mike.Ford]

This will ensure faster responses on problems. It can be downloaded from the system tab of your device.

Thanks,

Mike

[NenomaN]

This will ensure faster responses on problems. It can be downloaded from the system tab of your device.

Thanks,

Mike
my problem is:
i have the bullet 2hp it was working fine for just 10 days sooooo good
after these days i got a problem
the bullet 2hp didn't give the clients the router ip like
192.168.16.66
255.255.255.0
192.168.16.1
but its give the clients different ip with no gateway
and not internet
not just this but when i enter to the main page i found erorrs in the LAN STATISTICS in the Received and find difficulty to enter the main page i don't know why all of that after these days work fine
what is the problem with it
i'm using it with mikrotik server
plz need help
my configuration is:
aaa.1.status=disabled
aaa.status=disabled
bridge.1.devname=br0
bridge.1.fd=1
bridge.1.port.1.devname=eth0
bridge.1.port.2.devname=ath0
bridge.1.stp.status=disabled
bridge.status=enabled
dhcpc.1.devname=br0
dhcpc.1.status=disabled
dhcpc.status=disabled
dhcpd.1.status=disabled
dhcpd.status=disabled
dnsmasq.1.devname=eth0
dnsmasq.1.status=enabled
dnsmasq.status=disabled
ebtables.1.cmd=-t nat -A PREROUTING --in-interface ath0 -j arpnat --arpnat-target ACCEPT
ebtables.1.status=disabled
ebtables.2.cmd=-t nat -A POSTROUTING --out-interface ath0 -j arpnat --arpnat-target ACCEPT
ebtables.2.status=disabled
ebtables.3.cmd=-t broute -A BROUTING --protocol 0x888e --in-interface ath0 -j DROP
ebtables.3.status=disabled
ebtables.50.status=disabled
ebtables.51.status=disabled
ebtables.52.status=disabled
ebtables.status=enabled
httpd.port=80
httpd.status=enabled
igmpproxy.status=disabled
iptables.3.status=disabled
iptables.status=disabled
netconf.1.alias.1.status=disabled
netconf.1.alias.2.status=disabled
netconf.1.alias.3.status=disabled
netconf.1.alias.4.status=disabled
netconf.1.alias.5.status=disabled
netconf.1.alias.6.status=disabled
netconf.1.alias.7.status=disabled
netconf.1.alias.8.status=disabled
netconf.1.devname=eth0
netconf.1.ip=0.0.0.0
netconf.1.netmask=255.255.255.0
netconf.1.promisc=enabled
netconf.1.status=enabled
netconf.1.up=enabled
netconf.2.alias.1.status=disabled
netconf.2.alias.2.status=disabled
netconf.2.alias.3.status=disabled
netconf.2.alias.4.status=disabled
netconf.2.alias.5.status=disabled
netconf.2.alias.6.status=disabled
netconf.2.alias.7.status=disabled
netconf.2.alias.8.status=disabled
netconf.2.allmulti=disabled
netconf.2.devname=ath0
netconf.2.ip=0.0.0.0
netconf.2.netmask=255.255.255.0
netconf.2.status=enabled
netconf.2.up=enabled
netconf.3.autoip.status=enabled
netconf.3.devname=br0
netconf.3.ip=192.168.1.20
netconf.3.netmask=255.255.255.0
netconf.3.status=enabled
netconf.3.up=enabled
netconf.status=enabled
netmode=bridge
ppp.1.password=
ppp.1.status=disabled
ppp.status=disabled
radio.1.ack.auto=enabled
radio.1.ackdistance=4050
radio.1.acktimeout=48
radio.1.ani.status=disabled
radio.1.channel=2
radio.1.chanshift=0
radio.1.clksel=0
radio.1.countrycode=818
radio.1.devname=ath0
radio.1.dfs.status=
radio.1.frag=off
radio.1.ieee_mode=pureg
radio.1.mcastrate=1M
radio.1.mode=master
radio.1.rate.auto=enabled
radio.1.rate.max=54M
radio.1.rts=off
radio.1.rx_antenna=1
radio.1.rx_antenna_diversity=disabled
radio.1.status=enabled
radio.1.thresh62a=28
radio.1.thresh62b=28
radio.1.thresh62g=28
radio.1.tx_antenna=1
radio.1.tx_antenna_diversity=disabled
radio.1.txpower=10
radio.countrycode=818
radio.ratemodule=ath_rate_minstrel
radio.status=enabled
resolv.nameserver.1.ip=0.0.0.0
resolv.nameserver.1.status=enabled
resolv.nameserver.2.status=disabled
resolv.status=enabled
route.1.devname=br0
route.1.gateway=192.168.1.1
route.1.ip=0.0.0.0
route.1.netmask=0
route.1.status=enabled
route.status=enabled
tshaper.status=disabled
users.1.name=ubnt
users.1.password=VvpvCwhccFv6Q
users.1.status=enabled
users.status=enabled
wireless.1.addmtikie=enabled
wireless.1.ap=
wireless.1.authmode=1
wireless.1.autowds=enabled
wireless.1.compression=enabled
wireless.1.devname=ath0
wireless.1.fastframes=enabled
wireless.1.frameburst=enabled
wireless.1.hide_ssid=disabled
wireless.1.l2_isolation=disabled
wireless.1.mac_acl.1.mac=
wireless.1.mac_acl.1.status=disabled
wireless.1.mac_acl.10.mac=
wireless.1.mac_acl.10.status=disabled
wireless.1.mac_acl.11.mac=
wireless.1.mac_acl.11.status=disabled
wireless.1.mac_acl.12.mac=
wireless.1.mac_acl.12.status=disabled
wireless.1.mac_acl.13.mac=
wireless.1.mac_acl.13.status=disabled
wireless.1.mac_acl.14.mac=
wireless.1.mac_acl.14.status=disabled
wireless.1.mac_acl.15.mac=
wireless.1.mac_acl.15.status=disabled
wireless.1.mac_acl.16.mac=
wireless.1.mac_acl.16.status=disabled
wireless.1.mac_acl.2.mac=
wireless.1.mac_acl.2.status=disabled
wireless.1.mac_acl.3.mac=
wireless.1.mac_acl.3.status=disabled
wireless.1.mac_acl.4.mac=
wireless.1.mac_acl.4.status=disabled
wireless.1.mac_acl.5.mac=
wireless.1.mac_acl.5.status=disabled
wireless.1.mac_acl.6.mac=
wireless.1.mac_acl.6.status=disabled
wireless.1.mac_acl.7.mac=
wireless.1.mac_acl.7.status=disabled
wireless.1.mac_acl.8.mac=
wireless.1.mac_acl.8.status=disabled
wireless.1.mac_acl.9.mac=
wireless.1.mac_acl.9.status=disabled
wireless.1.mac_acl.policy=allow
wireless.1.mac_acl.status=disabled
wireless.1.macclone=disabled
wireless.1.scan_list.status=disabled
wireless.1.security.1.key=0122950800
wireless.1.security.default_key=1
wireless.1.security=none
wireless.1.signal_led1=94
wireless.1.signal_led2=80
wireless.1.signal_led3=73
wireless.1.signal_led4=65
wireless.1.sper=disabled
wireless.1.ssid=Madrid
wireless.1.status=enabled
wireless.1.wds.1.peer=
wireless.1.wds.2.peer=
wireless.1.wds.3.peer=
wireless.1.wds.4.peer=
wireless.1.wds.5.peer=
wireless.1.wds.6.peer=
wireless.1.wds=enabled
wireless.1.wmm=disabled
wireless.1.wmmlevel=-1
wireless.status=enabled
wpasupplicant.device.1.status=disabled
wpasupplicant.status=disabled

[skyhook]

This will ensure faster responses on problems. It can be downloaded from the system tab of your device.

Thanks,

Mike
my problem is:
i have the bullet 2hp it was working fine for just 10 days sooooo good
after these days i got a problem
the bullet 2hp didn't give the clients the router ip like
192.168.16.66
255.255.255.0
192.168.16.1
but its give the clients different ip with no gateway
and not internet
not just this but when i enter to the main page i found erorrs in the LAN STATISTICS in the Received and find difficulty to enter the main page i don't know why all of that after these days work fine
what is the problem with it
i'm using it with mikrotik server
plz need help
my configuration is:
aaa.1.status=disabled
aaa.status=disabled
bridge.1.devname=br0
bridge.1.fd=1
bridge.1.port.1.devname=eth0
bridge.1.port.2.devname=ath0
...

...not here, open a new post ;)

[Ipung]

I have 2 bullet radio. this is my first time to use them.

I use Poin to poin connection that use 2 grid antena. I have no problem with them while range of the network not so far.

My question is : How many Km farthest distance between server antena and client antena ? because I will plan to develope WAN it about 50 Km.


Thank
:P

[bradcapo2]

Thanks for the feedback. That is very useful.


taux pret auto (http://pret-auto.org) - taux pret auto differe selon la rise en compte ... calculent automatiquement le taux pour un prêt automobile donne.

[Karato]

I have 2 bullet radio. this is my first time to use them.
sonnerie portable mp3 (http://sonneriegratuite.org/) - Sonnerie portable MP3 est en effet unpouvoir de l'innovation technologique. Êtes-vous familier avec cette sonnerie portable?

[rakpatel]

This will ensure faster responses on problems. It can be downloaded from the system tab of your device.

Thanks,

Mike

Mike where to send the sup or config file. what is the email Address

[rjwifi]

i have a bullet 2hp attached in a 15 dbi omni , and have others 4 radios with wds "pluged" in this bullet , and a 10 or 15 clients with usb and external antenna , the traffic are 2mb max , my problem are the lost packets , very very lost packets , i tested all configurations and dont have responses , please , help-me

aaa.1.status=disabled
aaa.status=disabled
bridge.1.devname=br0
bridge.1.fd=1
bridge.1.port.1.devname=eth0
bridge.1.port.1.status=enabled
bridge.1.port.2.devname=ath0
bridge.1.port.2.status=enabled
bridge.1.stp.status=disabled
bridge.status=enabled
dhcpc.1.devname=br0
dhcpc.1.status=disabled
dhcpc.status=disabled
dhcpd.1.status=disabled
dhcpd.status=disabled
dnsmasq.1.devname=eth0
dnsmasq.1.status=enabled
dnsmasq.status=disabled
ebtables.1.cmd=-t nat -A PREROUTING --in-interface ath0 -j arpnat --arpnat-target ACCEPT
ebtables.1.status=disabled
ebtables.2.cmd=-t nat -A POSTROUTING --out-interface ath0 -j arpnat --arpnat-target ACCEPT
ebtables.2.status=disabled
ebtables.3.cmd=-t broute -A BROUTING --protocol 0x888e --in-interface ath0 -j DROP
ebtables.3.status=disabled
ebtables.50.status=disabled
ebtables.51.status=disabled
ebtables.52.status=disabled
ebtables.status=enabled
httpd.port=80
httpd.status=enabled
igmpproxy.status=disabled
iptables.3.status=disabled
iptables.status=disabled
netconf.1.alias.1.status=disabled
netconf.1.alias.2.status=disabled
netconf.1.alias.3.status=disabled
netconf.1.alias.4.status=disabled
netconf.1.alias.5.status=disabled
netconf.1.alias.6.status=disabled
netconf.1.alias.7.status=disabled
netconf.1.alias.8.status=disabled
netconf.1.devname=eth0
netconf.1.ip=0.0.0.0
netconf.1.netmask=255.255.255.0
netconf.1.promisc=enabled
netconf.1.status=enabled
netconf.1.up=enabled
netconf.2.alias.1.status=disabled
netconf.2.alias.2.status=disabled
netconf.2.alias.3.status=disabled
netconf.2.alias.4.status=disabled
netconf.2.alias.5.status=disabled
netconf.2.alias.6.status=disabled
netconf.2.alias.7.status=disabled
netconf.2.alias.8.status=disabled
netconf.2.allmulti=disabled
netconf.2.devname=ath0
netconf.2.ip=0.0.0.0
netconf.2.netmask=255.255.255.0
netconf.2.status=enabled
netconf.2.up=enabled
netconf.3.autoip.status=enabled
netconf.3.devname=br0
netconf.3.ip=192.168.254.225
netconf.3.netmask=255.255.255.0
netconf.3.status=enabled
netconf.3.up=enabled
netconf.status=enabled
netmode=bridge
ppp.1.password=
ppp.1.status=disabled
ppp.status=disabled
radio.1.ack.auto=disabled
radio.1.ackdistance=7950
radio.1.acktimeout=74
radio.1.ani.status=disabled
radio.1.channel=1
radio.1.chanshift=0
radio.1.clksel=0
radio.1.countrycode=076
radio.1.devname=ath0
radio.1.dfs.status=
radio.1.frag=2346
radio.1.ieee_mode=g
radio.1.mcastrate=54M
radio.1.mode=master
radio.1.rate.auto=enabled
radio.1.rate.max=11M
radio.1.rts=2346
radio.1.rx_antenna=1
radio.1.rx_antenna_diversity=disabled
radio.1.status=enabled
radio.1.thresh62a=28
radio.1.thresh62b=28
radio.1.thresh62g=28
radio.1.tx_antenna=1
radio.1.tx_antenna_diversity=disabled
radio.1.txpower=16
radio.countrycode=076
radio.ratemodule=ath_rate_sample
radio.status=enabled
resolv.nameserver.1.ip=10.48.132.1
resolv.nameserver.1.status=enabled
resolv.nameserver.2.status=disabled
resolv.status=enabled
route.1.devname=br0
route.1.gateway=10.48.132.1
route.1.ip=0.0.0.0
route.1.netmask=0
route.1.status=enabled
route.status=enabled
sshd.status=enabled
tshaper.in.1.devname=eth0
tshaper.in.burst=0
tshaper.in.rate=2024
tshaper.out.1.devname=ath0
tshaper.out.burst=0
tshaper.out.rate=2024
tshaper.status=disabled
users.1.name=ubnt
users.1.password=Xx5X5Pgs6TLf6
users.1.status=enabled
users.status=enabled
wireless.1.addmtikie=disabled
wireless.1.ap=
wireless.1.authmode=1
wireless.1.autowds=disabled
wireless.1.compression=disabled
wireless.1.devname=ath0
wireless.1.fastframes=disabled
wireless.1.frameburst=disabled
wireless.1.hide_ssid=disabled
wireless.1.l2_isolation=disabled
wireless.1.mac_acl.1.mac=
wireless.1.mac_acl.1.status=disabled
wireless.1.mac_acl.10.mac=
wireless.1.mac_acl.10.status=disabled
wireless.1.mac_acl.11.mac=
wireless.1.mac_acl.11.status=disabled
wireless.1.mac_acl.12.mac=
wireless.1.mac_acl.12.status=disabled
wireless.1.mac_acl.13.mac=
wireless.1.mac_acl.13.status=disabled
wireless.1.mac_acl.14.mac=
wireless.1.mac_acl.14.status=disabled
wireless.1.mac_acl.15.mac=
wireless.1.mac_acl.15.status=disabled
wireless.1.mac_acl.16.mac=
wireless.1.mac_acl.16.status=disabled
wireless.1.mac_acl.17.mac=
wireless.1.mac_acl.17.status=disabled
wireless.1.mac_acl.18.mac=
wireless.1.mac_acl.18.status=disabled
wireless.1.mac_acl.19.mac=
wireless.1.mac_acl.19.status=disabled
wireless.1.mac_acl.2.mac=
wireless.1.mac_acl.2.status=disabled
wireless.1.mac_acl.20.mac=
wireless.1.mac_acl.20.status=disabled
wireless.1.mac_acl.21.mac=
wireless.1.mac_acl.21.status=disabled
wireless.1.mac_acl.22.mac=
wireless.1.mac_acl.22.status=disabled
wireless.1.mac_acl.23.mac=
wireless.1.mac_acl.23.status=disabled
wireless.1.mac_acl.24.mac=
wireless.1.mac_acl.24.status=disabled
wireless.1.mac_acl.25.mac=
wireless.1.mac_acl.25.status=disabled
wireless.1.mac_acl.26.mac=
wireless.1.mac_acl.26.status=disabled
wireless.1.mac_acl.27.mac=
wireless.1.mac_acl.27.status=disabled
wireless.1.mac_acl.28.mac=
wireless.1.mac_acl.28.status=disabled
wireless.1.mac_acl.29.mac=
wireless.1.mac_acl.29.status=disabled
wireless.1.mac_acl.3.mac=
wireless.1.mac_acl.3.status=disabled
wireless.1.mac_acl.30.mac=
wireless.1.mac_acl.30.status=disabled
wireless.1.mac_acl.31.mac=
wireless.1.mac_acl.31.status=disabled
wireless.1.mac_acl.32.mac=
wireless.1.mac_acl.32.status=disabled
wireless.1.mac_acl.4.mac=
wireless.1.mac_acl.4.status=disabled
wireless.1.mac_acl.5.mac=
wireless.1.mac_acl.5.status=disabled
wireless.1.mac_acl.6.mac=
wireless.1.mac_acl.6.status=disabled
wireless.1.mac_acl.7.mac=
wireless.1.mac_acl.7.status=disabled
wireless.1.mac_acl.8.mac=
wireless.1.mac_acl.8.status=disabled
wireless.1.mac_acl.9.mac=
wireless.1.mac_acl.9.status=disabled
wireless.1.mac_acl.policy=allow
wireless.1.mac_acl.status=disabled
wireless.1.macclone=disabled
wireless.1.scan_list.status=disabled
wireless.1.security=none
wireless.1.signal_led1=94
wireless.1.signal_led2=80
wireless.1.signal_led3=73
wireless.1.signal_led4=65
wireless.1.sper=disabled
wireless.1.ssid=RJWIFI
wireless.1.status=enabled
wireless.1.wds.1.peer=00:E0:4C:FE:61:1B
wireless.1.wds.2.peer=00:E0:4C:F4:A3:BF
wireless.1.wds.3.peer=00:E0:4C:FE:6A:07
wireless.1.wds.4.peer=00:12:0E:B7:B7:55
wireless.1.wds.5.peer=
wireless.1.wds.6.peer=
wireless.1.wds=enabled
wireless.1.wmm=disabled
wireless.1.wmmlevel=-1
wireless.status=enabled
wpasupplicant.device.1.status=disabled
wpasupplicant.status=disabled