EAP-TLS & PEAP support

[dcmark]

Are there any plans on the foreseable to provide either PEAP or EAP-TLS support to AirOS?

[jknapp]

I would be interested in seeing some expanded options here as well.

[Gig_tmb]

I agree too! It needed function :!:

[UBNT-Zy]

Hello,

3.2 version of the AirOS does not provide the user interface for PEAP or TLS as there are no certificate management routines implemented currently.

We are looking forward to implement the GUI interface support of all the remaining 802.1x methods (TLS/PEAP) in future.
Until then manual configuration of the TLS and PEAP/MSCHAPv1 can be used as workaround while changing the wpasupplicant configuration file, however this will require advanced administration skills as the changes should be applied in the command shell (or uploaded with FTP).
Manual changes should be (re)stored using the /etc/persistent/rc.poststart file (each time system will boot) and saved using cfgmtd.
Please check the support forum for more details how the manual changes are applied and saved:
http://ubnt.com/forum/viewtopic.php?t=2917
http://ubnt.com/forum/viewtopic.php?t=1233

Thank you.

[ve7ka]

*Bump*

Just wondering if a PEAP gui is still on the roadmap for AirOS?

We would like to deploy Bullets as client bridges on our enterprise WPA-TKIP/PEAP campus wide SSID. Having a front end for this would help us big time and sell UBNT a lot of Bullets!

Thanks,

Geoff

[UBNT-Mike.Ford]

Hello,

This is something that is still on the backburner, but still on our list.

Thanks,

Mike

[ve7ka]

Hi UBNT.

I am a network analyst primarily focused on wireless connectivity at a large university in Canada. We have about 2000 access points using Cisco LWAPP/CAPWAP controllers. For our users the bullet will *hopefully* be deployed as a workgroup bridge in remote sites that do not have wired backbones. We have a number of these sites and our users are anxious to get something setup.

We would like these bullets to be dumped onto a number of RADIUS assigned VLAN's. In order to do this on our wireless network the user/bridge would need to authenticate via our WPA/PEAP network. Unfortunately we cannot do this yet as we are STILL waiting for your development team to add onboard PEAP support in AirOS.


If the support department cannot provide me with a concrete feature release date please have someone from your development management team contact me directly. If there is something we can do to bump up the priority here please let me know.

Thanks,

Geoff
(604) 822-1305

[ve7ka]

Over 2 weeks, No call, No email, No reply to this thread.. Whats the deal?

[Redstone]

I am very interested in PEAP, LEAP and EAP-TLS.
Our network requires WAP2 and PEAP without IDENTITY, thats why I need these settings in AirOS urgent.

[ve7ka]

Just stirring this up again....

[ClemFM]

Yes, EAP-TLS is at the top of my wish list also for AirOS :icon_exclaim:

Please :icon_biggrin:

[maggiore81]

I would like to add also LEAP to use the radius server integrated in the cisco's router

[oneofthefew]

Hello,

3.2 version of the AirOS does not provide the user interface for PEAP or TLS as there are no certificate management routines implemented currently.

We are looking forward to implement the GUI interface support of all the remaining 802.1x methods (TLS/PEAP) in future.
Until then manual configuration of the TLS and PEAP/MSCHAPv1 can be used as workaround while changing the wpasupplicant configuration file, however this will require advanced administration skills as the changes should be applied in the command shell (or uploaded with FTP).
Manual changes should be (re)stored using the /etc/persistent/rc.poststart file (each time system will boot) and saved using cfgmtd.
Please check the support forum for more details how the manual changes are applied and saved:
http://ubnt.com/forum/viewtopic.php?t=2917
http://ubnt.com/forum/viewtopic.php?t=1233

Thank you.

The threads you refer too take me to the Home page.

Do you a CLI reference manual or guide towards how to use EAP-TLS.

Thanks in advance