LiteStation 2 LEDs info / No WiFi signal

[smartcom]

Hi,
I have some kit with a LiteStation 2 board in it that isn't getting a WiFi signal.
There are LEDs on the board, labelled LAN2 and RDY (the others aren't installed).
Can anyone tell me if the following is the expected behaviour on power-up?
LAN2 is initially lit but dim for a second or so
Then LAN2 has 2 quick flashes, pause a second, then 1 flash
A pause of about 10 seconds
Then LAN2 has 2 quick flashes, pause a second, then 1 flash
Then RDY comes on for about 2 seconds, and then stays off

Also, if anyone has any ideas as to why it isn't getting a signal, that would be appreciated - other kit that I use is working fine on the same network.

Tim

[UBNT-Mike.Ford]

Hi,
I have some kit with a LiteStation 2 board in it that isn't getting a WiFi signal.
There are LEDs on the board, labelled LAN2 and RDY (the others aren't installed).
Can anyone tell me if the following is the expected behaviour on power-up?
LAN2 is initially lit but dim for a second or so
Then LAN2 has 2 quick flashes, pause a second, then 1 flash
A pause of about 10 seconds
Then LAN2 has 2 quick flashes, pause a second, then 1 flash
Then RDY comes on for about 2 seconds, and then stays off

Also, if anyone has any ideas as to why it isn't getting a signal, that would be appreciated - other kit that I use is working fine on the same network.

Tim

Hello,

Have you configured the LS2 previously?

Thanks,

Mike

[smartcom]

No I haven't, I have been troubleshooting some kit put together by a 3rd party.
I have just solved the problem, though - it was the access point I was trying to connect to (an Orange/Inventel Livebox FC40). As well as the LS not connecting to it, I had the same problem with an Edimax WiFi repeater, though other kit connected OK.

[UBNT-Mike.Ford]

No I haven't, I have been troubleshooting some kit put together by a 3rd party.
I have just solved the problem, though - it was the access point I was trying to connect to (an Orange/Inventel Livebox FC40). As well as the LS not connecting to it, I had the same problem with an Edimax WiFi repeater, though other kit connected OK.

Thanks for the update.

Mike