PDA

View Full Version : RocketM5 100 BASE-TX : so is 100Mbit the max speed?


dconn
01-19-2010, 01:37 PM
Hi all,

If the RocketM5 has a 100 BASE-TX Ethernet Interface (as per the PDF datasheet) how is it possible to get up to "150+ Mbps real tcp/ip thoughput" ?

I'm only looking this stuff up now because I'm planning on deploying a big installation with Ubiquiti gear and very hopeful that all goes well.

thanks,

D

900mhzdude
01-19-2010, 01:47 PM
it's up to 150Mbps both ways wich mean's the end users will be lucky to see 100Mbps if you search the forum there's a lot more info on it

Ron
01-19-2010, 04:28 PM
the same questions come up over and over and over again

davey
01-21-2010, 07:21 AM
And again!

900mhzdude
01-21-2010, 08:37 AM
yeah but its ok as long as my post count go's up lol

WisTech
01-21-2010, 01:35 PM
I know I can burst just over 100Mbps TCP on a 5mi link nLOS with BulletM5's and 2' dishes on either end using iperf. Rockets, obviously, even better! =) Multiple streams and aggregate bandwidth. The M products make for one hell of a link (low ping times even when loaded).

900mhzdude
01-21-2010, 02:19 PM
http://www.ubnt.com/forum/showthread.php?p=71594#post71594

Ron
01-21-2010, 09:52 PM
Just think, if Ubiquity made Ethernet cards they wouldn't advertise them as 10/100/1000 Ethernet cards the Ubiquity Ethernet cards would be 20/200/2000.


No, because ethernet standard is full duplex and 802.11 standard is half duplex.

UBNT-Mike.Ford
01-22-2010, 12:12 AM
Just think, if Ubiquity made Ethernet cards they wouldn't advertise them as 10/100/1000 Ethernet cards the Ubiquity Ethernet cards would be 20/200/2000.

Hello,

Please take the time to google the difference between half duplex wireless radios and full duplex Ethernet.

Thanks,

Mike

twinkletoes
01-22-2010, 04:54 PM
Just think, if Ubiquity made Ethernet cards they wouldn't advertise them as 10/100/1000 Ethernet cards the Ubiquity Ethernet cards would be 20/200/2000.

Pretty much all of the half-duplex wireless systems out there advertise their aggregate capacity.

Ethernet, ADSL, and full-duplex wireless radios generally advertise their speed in only one direction, not aggregate

tagno25
01-22-2010, 10:32 PM
ahh I c. So when you force your GigE Nic to half duplex it becomes a 2 GigE.

No, it would become 1000MB half-duplex (or 500MB aggregate, IIRC).

CzechEnglishFrenchGermanItalianPolishPortugueseRussianSpanish
Translations supported by vBET Translator 3.5.4