Managed Devices (How to)

[carullos]

Sorry if I missed something but I read the guide and looked through the forum and tried everything I could try in the program to figure this out...

I assume there is a way to add devices that are managed and unmanaged. I had aircontrol scan my network for some test devices and they showed up in the list. I cannot figure out how to classify them as managed or otherwise be able to have aircontrol ping them and record return time history data - or show offline or online etc...

I assume this is possible due to this statement in guide
===
Devices that are under "management" will periodically report runtime status to the AirControl server
===

Perhaps this is only available in the newer M class products and not available for my current devices that are 802.11 based not the newer ones. Mine are running latest 3.5 firmware.

Any clarification or suggestions on this? Thanks

Scott

[carullos]

Ok, I clicked connect then gave it the new password for ssh since I changed from default and it said scheduled for provisioning then it connected to radio, show the rssi and other info in the bottom part of screen then immediately said device operation failed - no communication from device after connect / please check connectivity from device to server.

This is where I am at I am going to rescan the forum for this maybe I'll find something since I got past the first part....

Scott

[carullos]

Firewall rule was preventing some communications. Making good progress now.

Now I need to figure out what ports and such the aircontrol needs to talk to the radios.... Torch time...

Scott