Failed to connect via SSH after 5.1 RC3 upgrade

[succeednet]

I upgraded Aircontrol to the latest .5 update earlier yesterday and everything went swimmingly. Looked good, worked well.

Later yesterday I noticed that 5.1 RC3 was released. Woot! So I downloaded, put the firmware in Aircontrol and upgrade my Rocket and NSM5 test bed. That too went well.

NSM5 upgraded and reconnected with AC no problem.

The rocket upgraded no problem but AC would not connect back with it. Tried a manual reconnect from AC and get the following:

2009-12-23 09:01:33 Failed to establish SSH connection: Auth cancel

I checked the rocket to make sure the upgrade didn't turn something off but SSH is on as well as password authentication.

As far as I can tell nothing has changed on this radio during the firmware upgrade.

Thanks

Dave

[succeednet]

Did some further testing. Downgraded the firmware back to 5.1 beta and Air control connected just fine after down grade.

Re upgraded the firmware to RC3 and it Aircontrol Connected just fine.

So what would be the possible cause of AC not connecting initially after the first upgrade?

[frogale]

Same problem here.. AirControl 1.0.08 and M5 with 5.1.2.. Probably bug in AC.. :icon_evil: