dadaniel
12-06-2009, 04:11 AM
Is it possible to get this into the next firmware (see attached file)?
View Full Version : Signal/Noise history
boydsoftprez
12-06-2009, 08:45 AM
Yes this would be a great feature to have.
konrad
12-06-2009, 10:24 AM
signal strength is exported via snmp in airos3, id havent tested airos5 but it is possible.
theres couple other values you can get, check cacti thread on this forum somewhere.
theres couple other values you can get, check cacti thread on this forum somewhere.
dadaniel
12-06-2009, 12:04 PM
signal strength is exported via snmp in airos3, id havent tested airos5 but it is possible.
theres couple other values you can get, check cacti thread on this forum somewhere.
it would be nice to have it in the firmware itself.... like the throughput statistics
theres couple other values you can get, check cacti thread on this forum somewhere.
it would be nice to have it in the firmware itself.... like the throughput statistics
konrad
12-07-2009, 06:02 AM
It wouldn't be very beneficial for large installations, better if it would be in air control. But thats just my opinion.
UBNT-Mike.Ford
12-07-2009, 02:03 PM
Hey Guys,
I shot this suggestion over to my software team.
Thanks,
Mike
I shot this suggestion over to my software team.
Thanks,
Mike
UBNT-keba
12-07-2009, 10:55 PM
it would be nice to have it in the firmware itself.... like the throughput statistics
Do you guys want to have it persistent or just like throughput graphs?
1.(persistent) I mean info is collected all time (let say 2hours moving range) and it is drown when graph window is open.
2.(temporal) Or it is starting to collect info and draw it when window is open.
(1.) is RAM angry we have to keep information history on device. But it is useful because it has history of the past. That is usually what is needed to check what happen 5min ago.
(2.) easy to add. But graphs window must be open to see history.
Of cause the best is to collect that info through SNMP to remote host and represent that info in the style you want (cacti, mrtg)
Also nice feature for AirControl. Thanks.
Do you guys want to have it persistent or just like throughput graphs?
1.(persistent) I mean info is collected all time (let say 2hours moving range) and it is drown when graph window is open.
2.(temporal) Or it is starting to collect info and draw it when window is open.
(1.) is RAM angry we have to keep information history on device. But it is useful because it has history of the past. That is usually what is needed to check what happen 5min ago.
(2.) easy to add. But graphs window must be open to see history.
Of cause the best is to collect that info through SNMP to remote host and represent that info in the style you want (cacti, mrtg)
Also nice feature for AirControl. Thanks.
konrad
12-08-2009, 07:48 AM
Well, Mike, if you really do include those things in Air Control, make sure it can replace something like cacti, so people like me can actually use it for something important than just as a show off how many air max devices i have :P
On the side note, i don't have anything against Java, till its maintenance free :icon_lol:
On the side note, i don't have anything against Java, till its maintenance free :icon_lol:
avolve
12-08-2009, 08:04 AM
Having it in AirControl would be good as well as syslog operation.
UBNT-Thomas
12-21-2009, 06:26 PM
http://www.ubnt.com/forum/showpost.php?p=66478&postcount=80
dadaniel
12-22-2009, 08:12 AM
Do you guys want to have it persistent or just like throughput graphs?
1.(persistent) I mean info is collected all time (let say 2hours moving range) and it is drown when graph window is open.
2.(temporal) Or it is starting to collect info and draw it when window is open.
(1.) is RAM angry we have to keep information history on device. But it is useful because it has history of the past. That is usually what is needed to check what happen 5min ago.
(2.) easy to add. But graphs window must be open to see history.
Of cause the best is to collect that info through SNMP to remote host and represent that info in the style you want (cacti, mrtg)
Also nice feature for AirControl. Thanks.
It would be nice to have it persistent(RAM), but I think showing last 48h would be enough
1.(persistent) I mean info is collected all time (let say 2hours moving range) and it is drown when graph window is open.
2.(temporal) Or it is starting to collect info and draw it when window is open.
(1.) is RAM angry we have to keep information history on device. But it is useful because it has history of the past. That is usually what is needed to check what happen 5min ago.
(2.) easy to add. But graphs window must be open to see history.
Of cause the best is to collect that info through SNMP to remote host and represent that info in the style you want (cacti, mrtg)
Also nice feature for AirControl. Thanks.
It would be nice to have it persistent(RAM), but I think showing last 48h would be enough
drwho17
12-22-2009, 11:32 AM
Wow that is nice, now if I could only get AirControl to play nice with my network.
Translations made by vBET 3.5.4