View Full Version : problem with PowerStation 2
omandoors
11-27-2009, 08:21 AM
Hello
If possible how to explain fully and in detail about the installation problem with PowerStation 2 Pictures
And how to access the Control Panel?
Is it acceptable system and run Windows?
I have purchased a new device I do not know how to use it
Please cooperation and explanation in detail
And I thank the board who assists..
Dave-D
11-27-2009, 05:30 PM
PowerStation by default uses the AirOS
operating system; here's the manual:
http://www.ubnt.com/wiki/index.php/AirOS_3.4
It uses a GUI that you can access with most
browsers--Windows or other.
What do you plan to use this radio for? Are you
sure it's the right one for your needs?
No manual exists for any Ubiquiti radio. Dave
I have purchased a new device I do not know how to use it
That's what happens when you buy from Spencer's Gifts.
http://www.spencersonline.com/sex-toys
Aldous11
09-05-2010, 10:49 PM
I have 6 of them in the field now.. They are working okay for me.. They don't really perform like I'd expect a 400mw card and an 18dBi antenna to work though.. From my testing they consistently have 5-6dB lower signal than an ARC 19 with a SR2.. It almost seems like they have a 12dBi antenna instead of an 18.. Like I've said before.. For the price..
Mike are the PS2's turning down the power to stay in the legal limits? 26 + 18 = 44..
I've taken a PS2 completely apart (I'll post more pics soon) and have tested it side by side with a LS2. Both the LS2 and the PS2 perform exactly the same when connected to different antenna's. I also tried connecting a SR2 to the PS2 antenna and I wasn't very impressed with the results.. The PS2 antenna performed worse than a 15dBi rootenna.. I tried both horizontal and vertical (mmcx = horiz, ufl = vertical on the ps2 antenna) I've also noticed that if I angle the PS2 slightly towards the sky it gets a better signal than if it is level..
I'm gonna be late for my first install unless I go hop in the shower 10 minutes ago..
Forgot to mention, I'm using fw 2.1.6..
Thanks,
Headbang
09-10-2010, 02:45 PM
I have 6 of them in the field now.. They are working okay for me.. They don't really perform like I'd expect a 400mw card and an 18dBi antenna to work though.. From my testing they consistently have 5-6dB lower signal than an ARC 19 with a SR2.. It almost seems like they have a 12dBi antenna instead of an 18.. Like I've said before.. For the price..
Mike are the PS2's turning down the power to stay in the legal limits? 26 + 18 = 44..
I've taken a PS2 completely apart (I'll post more pics soon) and have tested it side by side with a LS2. Both the LS2 and the PS2 perform exactly the same when connected to different antenna's. I also tried connecting a SR2 to the PS2 antenna and I wasn't very impressed with the results.. The PS2 antenna performed worse than a 15dBi rootenna.. I tried both horizontal and vertical (mmcx = horiz, ufl = vertical on the ps2 antenna) I've also noticed that if I angle the PS2 slightly towards the sky it gets a better signal than if it is level..
I'm gonna be late for my first install unless I go hop in the shower 10 minutes ago..
Forgot to mention, I'm using fw 2.1.6..
Thanks,
See http://www.ubnt.com/forum/showthread.php?t=22894