weird thing about NS2...

[florin]

I can get a good signal from a AP on my laptop wireless card(AP is very close) but the NS2 doesn't find it..what could be the problem?

[du7pci]

hi florin,
may i ask how you configured your ns2? maybe the antenna settings is not properly configured.

[florin]

I did everything like in the "http://www.ubnt.com/downloads/Nano_Quick_Set-up.pdf"..my antenna is set on adaptive.
i can find 15 different networks..but i can't find this one.

[du7pci]

would you want your ns2 to become an Access point?

[florin]

i want to get that signal through my NS2 who is wired connected to my laptop.

[WHT]

Then you want to set your Nano as a Station that will connect to that AP.

[florin]

yes i know..i already get 16 different wireless networks..but 1 of them(the closest) seems to be invisible to NS2 .

[florin]

mhhh..nobody knows or want to help me.
when i change the name of the country in the settings..some networks apear, should i try every country in that list to find that signal?

[WHT]

What do you mean it seems to be invisible to the Nano? Can you see it with your laptop if you are real close to it?

[florin]

What do you mean it seems to be invisible to the Nano? Can you see it with your laptop if you are real close to it?

yes, it worked on my laptop wireless card..i've put the ns2 and my laptop in the same place, to see if the spot is the problem, but the problem continues.

[WHT]

Have you set your Nano to Station mode?

[rakpatel]

yes, it worked on my laptop wireless card..i've put the ns2 and my laptop in the same place, to see if the spot is the problem, but the problem continues.

First What Frequency used by AP or in what mode it is ? May be it operate in 5.8 GHz and NS2 do not scan. Or it is in n mode and NS2 do not scan it?

Your Laptop card may be a/b/g/n and let you get connect with AP?

[florin]

yes.it's on station mode.

http://support.dell.com/support/edocs/network/R199143/en/sp1395mc.htm#1824987 this is my card.
the AP operates in 2.4 ghz

probabl the "n" mode is the correct answer.

[du7pci]

hi florin,
your experience is quite unusual. i think yiu should try a specefic antenna setting. like try vertical, then horizontal and try to set the NS2 to the smallest output power.

[florin]

hi florin,
your experience is quite unusual. i think yiu should try a specefic antenna setting. like try vertical, then horizontal and try to set the NS2 to the smallest output power.

good ideea..i will try it..thanks!:icon_smile:

[florin]

nope..still no result.

[du7pci]

hi,
try to configure your nano to become an AP, see if you can find it in your laptop's list of available APs. this way you can find out if your radio works. still use the smallest power possible.