Does not automatically pickup devices with DMZ enabled

[raytaylor]

Just wondering if anyone knows how to make aircontrol find devices with DMZ switched on?

[Dave-D]

Are you sure you mean DMZ, Ray?


DMZ is a firewall setting, to bypass
routing rules. And because a device
using DMZ is in the LAN scope, it
should be discovered by IP. Dave

[raytaylor]

Sorry, I should have clarified.

I have a Nanostation at a client's premesis that is set to forward everything to the client's internal server. However it must also be forwarding the aircontrol scanning queries coming from the wlan side as aircontrol does not automatically discover the client's nanostation.

When I untick the DMZ option in the client's nanostation, it is automatically discovered.

[raytaylor]

Here is a network layout to show you how i am scanning. Each nano has an ip address on the wlan side and all are in nat routing mode.

http://i50.tinypic.com/28bf7sl.png

[UBNT-Thomas]

The scan (button) will cause UDP broadcast that will typically be limited to the subnet. For all cases where devices cannot be automatically found using this mechanism, use the "Add" menu under the device table. The dialog that opens will let you manually scan IP ranges or add devices directly by entering the IP number.