maximum distance nano m5 to nano m5

[internetsaco]

how do you set up nano to get distance in the 10 km radius clear line of sight

ive tried 5,10,20,40 mhz nothing reach beyond 6 km

the noise floor seem acceptable -96 on most of the frequency

ack manual, airmax off , aggregation on antenna set to 27 dbi

tower 200 feets.

this is what i get from my four ap nano m5 on 2 different sites

from 0-3 kilometer signal strenght -59-70
from 3-5 kilometer signal drop to -72-80
from 5-7 kilometer signal drop to -80 -88 not associating with the ap

[UBNT-Mike.Ford]

Hello,

How many AP's are you seeing when you do a scan?

Thanks,

Mike

[internetsaco]

Hello,

How many AP's are you seeing when you do a scan?

Thanks,

Mike

i can see both ap two in each tower. as soon as i reach 500 foot i get the ap on the side im standing. everything normal.

on the long run only one appear in the scan.

[osnet]

too bad that,

I have two regular NS5 to NS5 with 6 miles getting like 20Mbps =) (PtP)

[UBNT-Mike.Ford]

Hello,

What firmware are you using?

Thanks,

Mike

[spainuser]

I have same problem with 2 NSM5 PtP. I think that real max TX power of a NSM5 is 19-20 dbm and not 27 dbm.

[InoX]

from 5-7 kilometer signal drop to -80 -88 not associating with the ap
5.6km I get 30-38mbps, 2xNS5M

Signal Strength: -72 dBm
Horizontal / Vertical: -74 / -71 dBm
Connections: 1
Noise Floor: -96 dBm
Transmit CCQ: 89 %
TX/RX Rate: 162.0 Mbps / 162.0 Mbps
AirMax: Enabled
AirMax Quality: 78 %
AirMax Capacity: 51 %