fotodd
10-18-2009, 12:36 PM
I would like some help in changing the OS on my Life Station 5 board from Ikarus OS to AIr OS 3.5. I am new at this so if someone out there can give a step by step guide to making this change would be greatly appreciated. Thanks!
rakpatel
11-21-2009, 12:56 AM
FIrst connect Lite Station 5 to your PC through RS232 port means at your serial port. Than start Hyper Terminal and than follow IKARUS procedure. Following are required setup
1. Hyper Terminal or Telnet Connectivity to LS5 throught RS232
2. TFTP Client (I prefered WIERD Solution TFTP Client)
3. Ethernet Connectivity to LS5 when keep your PC IP example 192.168.1.10
4. Set LS5 to factory default.
Steps
1. Power on LS5 connect Ethernet cable as well as RS232 to LS5
2. Keep hyper terminal on
3. When you get LS5 booting keep pressing CTRL+C to get redboot propt.
4. Than follow IKRAUS Manual for LS5
