View Full Version : Does not recognize the rocket
overburn
10-12-2009, 01:45 AM
I'm trying to get connected to my 2 rockets m5 and it's does not finds them after scan, but if I ad manually it says unknown but after clicking connect the login window for the password popsup i enter the password but not getting any info on the device. Here's a log. I got aircontrol installed on my dell laptop with 1 lan interfece set to 192.168.1.1/255.255.255.0 to wich is a rocket(192.168.1.21) connected, and a wlan interface 10.0.6.14/255.0.0.0. Tried disabling the wlan but got no effect. So what's wrong.
overburn
10-12-2009, 06:00 AM
The thing started working on it's own after some time, I know beta :] But that's wierd
UBNT-Thomas
10-12-2009, 06:57 AM
The devices should be found in the local subnet, all connected interfaces will receive the discovery request. I see that working in my setup.
AirControl will periodically issue a discovery request to the local subnet. So if packets are dropped, the device may show with a delay.
There will also be a delay if you turn network interfaces on and off while AirControl is running.
Which OS are you using?
The system log says the device was discovered:
DEVICE_DISCOVERED 2009-10-12 00:00:00:00:00:00 192.168.1.21 <unkown> New device <unkown> discovered
It also says that AirControl could not even reach the device:
DEVICE_CONNECT_FAILURE 2009-10-12 00:00:00:00:00:00 192.168.1.21 <unkown> Failed to establish SSH connection: java.net.ConnectException: Connection timed out: connect
I would suggest you perform some basic connectivity tests (ping and port reachability) first.
overburn
10-12-2009, 07:02 AM
Winxp HE sp3 but i got issues with manualy added devices:]
UBNT-Thomas
10-12-2009, 07:06 AM
What is the build number on the lower left corner of the screen?
BTW Support for manual added devices will be enhanced in the next build.
overburn
10-12-2009, 09:01 AM
v1.0.01-beta2.862 2009-10-07 20:43
