AirOS 3.5 released!

[UBNT-Edmundas]

Download it from http://www.ubnt.com/support (http://www.ubnt.com/support/downloads.php)

Version 3.5 (10/01/2009)
-------------------------
- increased reset to defaults timings (prevents from accidental reset to defaults).
- fixed: WEB UI lock.
- improved: Traffic shaping.

Version 3.5-rc (09/11/2009)
---------------------------
- fixed: PPPoE client locks up.
- fixed: PPPoE client can't authenticate if in username symbol # is used.
- fixed: Traffic shaping is not working. Can't add shaping rules.
- fixed: VLAN QoS to WMM mapping.
- fixed: Traffic shaper is expected to honor packet priority.
- fixed: WEP entry field validation error message on Web UI.
- fixed: problem with AP channel when in some circumstances(after reboot/softrestart) it might get different from config value
- improvement: STA-Bridge multiple IP and VLAN per MAC.
- improvement: Set pppoe maxfail to 0 by default.
- added: Ethernet port MTU value can be set manually up to 1692 bytes (Long packet support (>1500bytes)).
- added: 152bit (128bit key + 24bit IV) WEP support in Web UI and config.

[fotodd]

I am trying change the OS on my LS5 boards from Ikarus to Air OS and I am not sure what to do can someone help me with this issue. Thanks!

[fotodd]

I am just starting at this is there a more step by step approach that you could provide? Thank You!

[fotodd]

More of a step by step approch to changing the OS on my LS 5 boards from Ikarus to Air OS 3.5. Thanks for the help.

[sar]

Hook up the LS5 board to the serial port but you will need a max232 chip for level conversion.

Watch on the terminal at 115200 baud your redboot booting.

Hit contol C at the right moment and type urescue.

In windows terminal tftp the Air Os firmware.