Ashgar
10-02-2009, 09:08 AM
hi
What is the requierments for compailing Firmware ?
What is the requierments for compailing Firmware ?
View Full Version : Requierments for sdk
aspicer
10-02-2009, 01:57 PM
hi
What is the requierments for compailing Firmware ?
* I found this answer in the Wiki:
http://www.ubnt.com/wiki/index.php/Setting_up_build_environment_in_Ubuntu_for_re-compiling_AirOS
and have done this already and am compiling firmwares and successfully loading them onto LS2 and Bullet2 devices.
* I need a bit of help myself ... have done a lot of homework / hacking / editing / re-compiling / and uploading firmwares. But I think I need to get a hold of the Firmware (Programmer) guy Edmundas.
I want to set my firmwares by default to have my settings:
Station and Router mode - DHCP for WLAN ip settings, DHCP and NAT for the LAN. My IP Addresses and settings by default.
... having trouble finding how to do that.
What is the requierments for compailing Firmware ?
* I found this answer in the Wiki:
http://www.ubnt.com/wiki/index.php/Setting_up_build_environment_in_Ubuntu_for_re-compiling_AirOS
and have done this already and am compiling firmwares and successfully loading them onto LS2 and Bullet2 devices.
* I need a bit of help myself ... have done a lot of homework / hacking / editing / re-compiling / and uploading firmwares. But I think I need to get a hold of the Firmware (Programmer) guy Edmundas.
I want to set my firmwares by default to have my settings:
Station and Router mode - DHCP for WLAN ip settings, DHCP and NAT for the LAN. My IP Addresses and settings by default.
... having trouble finding how to do that.
UBNT-Edmundas
10-05-2009, 04:04 AM
* I need a bit of help myself ... have done a lot of homework / hacking / editing / re-compiling / and uploading firmwares. But I think I need to get a hold of the Firmware (Programmer) guy Edmundas.
I want to set my firmwares by default to have my settings:
Station and Router mode - DHCP for WLAN ip settings, DHCP and NAT for the LAN. My IP Addresses and settings by default.
... having trouble finding how to do that.
You need to change rootfs/ls2/usr/etc/system.cfg and rootfs/ls5/usr/etc/system.cfg configuration files with your own.
I want to set my firmwares by default to have my settings:
Station and Router mode - DHCP for WLAN ip settings, DHCP and NAT for the LAN. My IP Addresses and settings by default.
... having trouble finding how to do that.
You need to change rootfs/ls2/usr/etc/system.cfg and rootfs/ls5/usr/etc/system.cfg configuration files with your own.
aspicer
10-05-2009, 09:14 AM
You need to change rootfs/ls2/usr/etc/system.cfg and rootfs/ls5/usr/etc/system.cfg configuration files with your own.
Yes, thank you. I had already figured that out after I wrote that post, after much looking around the SDK files, capturing build output, and testing in 3 equipments (LS2 and Bullet2.)
:icon_eek:
Yes, thank you. I had already figured that out after I wrote that post, after much looking around the SDK files, capturing build output, and testing in 3 equipments (LS2 and Bullet2.)
:icon_eek:
Languages translations delivered by vBET 3.5.4