nikosterizakis@yahoo.gr
10-02-2009, 01:04 AM
Hi all,
an NS2 network consists of a WDS AP and 5 WDS stations.
The connection between trhe WDS station and a specific WDS AP is very difficult (even with a signal of -55dbm or better).
The CCQ indication at this station varies very rapidly between 100% and sometimes 0% where the signal is lost. Noise floor varies between -92 and -75 dbm.
The station has a clear line of sight to the WDS AP and Fresnel zones are clear.
In all WDS stations the automatically selected wifi channel is 1. Could there be a ch.1 interference problem?
Editing the ch.1 out, no connection is established.
Any help here is appreciated.
an NS2 network consists of a WDS AP and 5 WDS stations.
The connection between trhe WDS station and a specific WDS AP is very difficult (even with a signal of -55dbm or better).
The CCQ indication at this station varies very rapidly between 100% and sometimes 0% where the signal is lost. Noise floor varies between -92 and -75 dbm.
The station has a clear line of sight to the WDS AP and Fresnel zones are clear.
In all WDS stations the automatically selected wifi channel is 1. Could there be a ch.1 interference problem?
Editing the ch.1 out, no connection is established.
Any help here is appreciated.
