Avi Vaknin
09-30-2009, 02:45 AM
Hi,
I tried to watch how the NS5 supports the EN 301 893 v1.4.1.
I connected two NS5, one as AP and the other as client.
I injected radar pulses to the AP, but didn’t see it stops transmission for Non-occupied time.
The radar pulses were according to the standard, at reception level of -30 to -60dBm and frequency of 5.5GHz, 5.499GHz, 5.497GHz.
NS5 frequency was 5.5GHz.
I tried country code of Belgium, Bulgaria, USA.
NS5 firmware is XS5.ar2313.v3.4.4390.090521.1803.
DFS was enabled in the GUI during all experiments.
Do u have any idea why the NS5 did not recognized the existence of the radar signal?
I tried to watch how the NS5 supports the EN 301 893 v1.4.1.
I connected two NS5, one as AP and the other as client.
I injected radar pulses to the AP, but didn’t see it stops transmission for Non-occupied time.
The radar pulses were according to the standard, at reception level of -30 to -60dBm and frequency of 5.5GHz, 5.499GHz, 5.497GHz.
NS5 frequency was 5.5GHz.
I tried country code of Belgium, Bulgaria, USA.
NS5 firmware is XS5.ar2313.v3.4.4390.090521.1803.
DFS was enabled in the GUI during all experiments.
Do u have any idea why the NS5 did not recognized the existence of the radar signal?
