Packet Loss% Issue

[osnet]

Hi to all I have with 2 of my links.

I have one link of 1 miles and get like 40Mbps TCP.

Without and With Airmax the same behavior

192.168.1.20 64 byte ping: ttl=63 time=2 ms
192.168.1.20 64 byte ping: ttl=63 time=1 ms
192.168.1.20 64 byte ping: ttl=63 time=1 ms
192.168.1.20 64 byte ping: ttl=63 time=1 ms
192.168.1.20 64 byte ping: ttl=63 time=1 ms
192.168.1.20 64 byte ping: ttl=63 time=1 ms
192.168.1.20 64 byte ping: ttl=63 time=2 ms
192.168.1.20 64 byte ping: ttl=63 time=3 ms
192.168.1.20 ping timeout
192.168.1.20 64 byte ping: ttl=63 time=486 ms
192.168.1.20 64 byte ping: ttl=63 time=1 ms
192.168.1.20 ping timeout
192.168.1.20 ping timeout
192.168.1.20 ping timeout
192.168.1.20 ping timeout
192.168.1.20 ping timeout
192.168.1.20 64 byte ping: ttl=63 time=156 ms
192.168.1.20 64 byte ping: ttl=63 time=1 ms
192.168.1.20 64 byte ping: ttl=63 time=2 ms
192.168.1.20 64 byte ping: ttl=63 time=2 ms
192.168.1.20 64 byte ping: ttl=63 time=1 ms
192.168.1.20 64 byte ping: ttl=63 time=1 ms

Sometimes the pings go high like 300ms and goes down again.

I change channels, also I do and spectrum analysis and use some different clear channels.

I am using the old version 5.0 and I have another link with the new one with the same issue in that case the packet loss some time it's less than 1% but I see the behavior of goes up the latency sometimes with traffic and without traffic.

All my equipment are AP WDS ----> Station WDS

[WifiMax]

Hey Osnet, can we get a few more details on your setup? What equipment your using with which antennas etc...

How is your line of sight?

Any CCQ% you could give as well?

[UBNT-Mike.Ford]

Hello,

Please post the config files for the units. Can you test with AirMax on and off.

Thanks,

Mike

[osnet]

Hi,

I am using MTI Panels 23dbi in both link. Distance of the links 1 miles each.

AP WDS --- STATION WDS.

I try with both Airmax on and off.