NanoStation 5 Network speed test

[boulinguez]

Hi,

I've installed two NS5 v3.4 at 300m distance from each other on two towers here to link 2 buildings. Both antennas are set as bridge and link at -50dBi, noise floor at -90dBi, 40Mhz channel width, 5800Mhz.

Everything works fine, but I have a question about the AirOS integrated speedtest wich is :

How come do I only get 11Mbps throughput at this link speed, wich I get same results in 20Mhz channel width ?

http://www.minisansfil.com/images/untitled.jpg

[UBNT-Mike.Ford]

Hello,

The internal speed test is limited by your CPU. You need to run a 3rd party speed test such as Jperf or Btest to get accurate results.

Thanks,

Mike