error 500 & ...

[sorry4uboth]

Hi guys

Thanks for good products.

I have a little problem, more confusing than be a problem!

My "Nanostation 5 loco" has some internal problems.

The day before the test beside my laptop was completely Ok.

But as I installed it on the roof when I connect The "LAN" and "POE" cable together I can not ping or open the web GUI. and in the mean time the LAN LED disable and enable again and so and so....

but if I connect the POE cable first the I connect the LAN cable I can ping the device but no web page also..

Just for the first time I connect the cable, the device ask for password and after entering data the page still reloads and ....

sometimes I get the (Internal Server Error - 500) and sometimes not!

Help me Fix this problem.

Thanks

[UBNT-Mike.Ford]

Hi guys

Thanks for good products.

I have a little problem, more confusing than be a problem!

My "Nanostation 5 loco" has some internal problems.

The day before the test beside my laptop was completely Ok.

But as I installed it on the roof when I connect The "LAN" and "POE" cable together I can not ping or open the web GUI. and in the mean time the LAN LED disable and enable again and so and so....

but if I connect the POE cable first the I connect the LAN cable I can ping the device but no web page also..

Just for the first time I connect the cable, the device ask for password and after entering data the page still reloads and ....

sometimes I get the (Internal Server Error - 500) and sometimes not!

Help me Fix this problem.

Thanks

Hello,

Please attempt to log into the device using the IP/network.cgi

Once in, update the firmware to V3.4 and your problems will be solved.
Thanks,

Mike

[sorry4uboth]

Dear Mike.

I have been searched through the forum and found the other solution.

This didn't work for me!

any other solution?

Thanks

[din0]

sometimes I get the (Internal Server Error - 500) and sometimes not!



Clear the browser cache.

Also are you giving the NS enough time to boot.

[sorry4uboth]

Hi everybody

Problem solved!

The cache was not the problem...

The Cable I used to connect POE to NS was the issue!!

The cable works great on the network but I tested every CAT 6 cable and I couldn't use over 50 meter!

so the problem was the CAT6 cable.

Thanks for your time ;)

[UBNT-Mike.Ford]

Hi everybody

Problem solved!

The cache was not the problem...

The Cable I used to connect POE to NS was the issue!!

The cable works great on the network but I tested every CAT 6 cable and I couldn't use over 50 meter!

so the problem was the CAT6 cable.

Thanks for your time ;)

Thanks for the update.

Mike