NS5 Loco resets

[Backard]

I hav two NS5 Loco. One is setup as Station WDS and the other as AP WDS.

The first one loses connection a couple of times each day and the configuration is reset it to default setup.

So I have to connect to 192.168.1.20 and change the configuration and then it works for some time again.

I use the latest firmware.

config is attached.

[UBNT-Mike.Ford]

I hav two NS5 Loco. One is setup as Station WDS and the other as AP WDS.

The first one loses connection a couple of times each day and the configuration is reset it to default setup.

So I have to connect to 192.168.1.20 and change the configuration and then it works for some time again.

I use the latest firmware.

config is attached.


Hello,

Also please post your support info files.

Thanks,

[Backard]

Support info file attached

[Backard]

The files from the other station - Access Point WDS

[Backard]

Uptime is 25 hours now :)

[Backard]

It gave up after 29 hours :icon_evil:

I will try a new cable tomorrow.

[UBNT-Mike.Ford]

It gave up after 29 hours :icon_evil:

I will try a new cable tomorrow.

Hello,

I do not see anything wrong in the config or info files. Are you getting any power surges or dirty power by chance?

Thanks,

Mike

[Backard]

Hello,

I do not see anything wrong in the config or info files. Are you getting any power surges or dirty power by chance?

Thanks,

Mike

I don't think so. How can I tell?

Ethernet cable is replaced. Hope that will make a difference cause my other NS5 has an uptime of 3 days and 22 hours now.

[UBNT-Mike.Ford]

I don't think so. How can I tell?

Ethernet cable is replaced. Hope that will make a difference cause my other NS5 has an uptime of 3 days and 22 hours now.


Hello,

Please keep me updated as to weather the cable changed solved the issues.

Thanks,

Mike

[Backard]

Hello,

Please keep me updated as to weather the cable changed solved the issues.

Thanks,

Mike

So far it seems very good. Uptime is 2 days and 15 hours,

[onca]

Hi Guys,

I have exactly the same problem with NSM5. It also goes to default after some time. I will try to change the cable tomorrow.

[onca]

I tryed to change the cable, checked everything and it is reseted again after one hour. Today I will try to upgrade the firmware,..

[onca]

New firmware did not make any change. I checked again the cable and than also changed the nanostation for the new one. The AP is still reseting to default again and again. Five times today. Client works fine. Please help :o)

[UBNT-Mike.Ford]

New firmware did not make any change. I checked again the cable and than also changed the nanostation for the new one. The AP is still reseting to default again and again. Five times today. Client works fine. Please help :o)

Hello,

I will need to get this unit backfor testing. Please visit http://www.ubnt.com/support and fill out the RMA Request Form.

Thanks,

[eldihego]

es realmente increible trabajar con nano station loco son de lo mejor y que dia a dia realizamos enlaces de largas distancias y su interfaz grafica es muy impresionate

[Backard]

Hello,

Please keep me updated as to weather the cable changed solved the issues.

Thanks,

Mike

A little update. Both NS5 of mine now works very good :icon_biggrin:

[onca]

I would like to say that the change of the POE helped. Now it works good.

And Mike, thanks for yesterday´s show in Prague :)

[UBNT-Mike.Ford]

I would like to say that the change of the POE helped. Now it works good.

And Mike, thanks for yesterday´s show in Prague :)


Your welcome and thanks for the update.

Mike