NanoStation2 reeboot each 20 minutes

[Juanjo]

I need Some help, I have about 30 nanostations2 on my network, Most of them reboot each 20 minutes, i mean seem like shut down and indmediatly turn on it happens in 5 seconds,
i dont know if it happens for some badconfiguration, i think no because all my nanos has the same config in there are some that dont have this problem,

I really need help , i have complaining customers

[dadaniel]

Try switching the power supply

[UBNT-Mike.Ford]

I need Some help, I have about 30 nanostations2 on my network, Most of them reboot each 20 minutes, i mean seem like shut down and indmediatly turn on it happens in 5 seconds,
i dont know if it happens for some badconfiguration, i think no because all my nanos has the same config in there are some that dont have this problem,

I really need help , i have complaining customers

Hello,

Please check the power supplies. Also are you running these units on power conditioners or UPS?

Thanks,

[Juanjo]

Hello,

Please check the power supplies. Also are you running these units on power conditioners or UPS?

Thanks,

i have changed the power supplies, from the nanos, but still having the trouble. i have changed the PoE too but the same thing, I have upgrade the firmware and tha same thing, i dont know wicht is the next step, ask for a RMA, but is it hard because i have a lot of customer linked to those radios, any other suggenstin, or some one hear some problem like mine,

about the power conditioner i dont use one, is expensive use one on each station that i have.

do you think that's the reason for what happens to me

[UBNT-Mike.Ford]

i have changed the power supplies, from the nanos, but still having the trouble. i have changed the PoE too but the same thing, I have upgrade the firmware and tha same thing, i dont know wicht is the next step, ask for a RMA, but is it hard because i have a lot of customer linked to those radios, any other suggenstin, or some one hear some problem like mine,

about the power conditioner i dont use one, is expensive use one on each station that i have.

do you think that's the reason for what happens to me

Hello,

It sounds as though you might have dirty power in the area forcing reboots of the units when it flucuates greatly.

Thanks,

Mike

[Jason O]

Make sure watchdog is disabled or is set to a valid IP

[Juanjo]

if i disable watchdog i cant ping the radio from the server, i use zennoss for monitoring the radios, but please can u explain me what is the problem that i use the ping watch dog

[Juanjo]

Hello,

It sounds as though you might have dirty power in the area forcing reboots of the units when it flucuates greatly.

Thanks,

Mike

i know that can be one reason for the problem, but when i configure a new nano i dont have the problem , the problem start 3 weeks before. so i dont think that this is the problem, about the watchdog im going to try disabling it to see what happen

[UBNT-Mike.Ford]

i know that can be one reason for the problem, but when i configure a new nano i dont have the problem , the problem start 3 weeks before. so i dont think that this is the problem, about the watchdog im going to try disabling it to see what happen

Hey jaunito,

What version of the firmware is on all of the units? The new units vs the rebooting units? Also can you let me know how it goes with the ping watchdog off?

Thanks,

[Juanjo]

Hey jaunito,

What version of the firmware is on all of the units? The new units vs the rebooting units? Also can you let me know how it goes with the ping watchdog off?

Thanks,

Ok Guys i really thanku for the help-support tha u give to me.
That's tha thing i have disable the watch dog and the problem has solved.
i am going to monitorize all mi radios and see whats happenn
till now i have a radio 7 hours up.
so thank you again

Best regards to all of u
i will see you on my next doubt

[Juanjo]

Make sure watchdog is disabled or is set to a valid IP

Thank U Jason U be soo Helpfull

[Juanjo]

since i disable the watchdog my radios didnt reboot. the thing is i can access them from the server, so i dont know if this because i disable the wachdog.
any idea?

i use zenoss ! on linux to monitorize the antenas