View Full Version : NTP Nano 2
Camogon_2009
08-26-2009, 11:34 PM
Hi,
just realised, that there is a strange date and time on the main page. Used time.windows.com, but didn't work. Tried another time server, the same.
Correct time in the devices doesn't really matter but maybe you have a suggestion.
So far the AP and the Station work very well. Have a fast and stable link.
I like the Nano!!!
agsweeney
08-27-2009, 01:45 AM
So long as you have your network settings configured properly on the device (IP/Subnet/Gateway/DNS or Working DHCP) it should work (it does on all of mine).
I use time.apple.com, as I have had a few issues in the past with the Microsoft time servers.
Camogon_2009
08-27-2009, 02:40 AM
I tried time.apple.com, no changes so far.
Settings should be ok. Have DHCP.
Anything else except Enable NTP has to be enabled?
Euphoria
08-29-2009, 02:51 PM
Hi,
im have a nanostation 2 and use http://www.pool.ntp.org/ and work fine.
im put pool.ntp.org server and check the log but nothing change. im try to reboot the antenna and say problems. im connect via ssh and write the command: date and he give me the correct date. after thats im go to the log and all ok.
maybe the date command made something or maybe im need to wait some min. before try!
Euphoria
Camogon_2009
08-31-2009, 12:23 AM
How to connect via SSH to the Nano2?
In Service- SSH you can only enable/disable or change the port.
But no command!
Do anybody know the time intervall for the Server or the Nano for adjusting the date/time?
Once per day or once per month or ...?
What firmware are you using?
All mine have:
Enable SSH Server: [?]
Server Port: [ ___ ]
Euphoria
08-31-2009, 01:19 PM
in windows, http://portableapps.com/apps/internet/putty_portable
in linux, from the terminal: ssh -l username ipaddress (example: ssh -l camogon_2009 192.168.1.1)
im use the 3.4 version but im thing 3.2.2 version also work.
Camogon_2009
09-01-2009, 12:41 AM
The date in my Nanos is even going backwards!
Last week it was May 29 2009.
Today it's May 22 2009.
As my Nanos are working very nicely I won't do any experimental work including additional software.
Either NTP works and if not - no problem. Don't need an exact date and time on the Main Page. Just tried the Service.
Jason O
09-01-2009, 11:01 PM
192.43.244.18 try this IP
myronray
09-09-2009, 08:16 PM
Hi,
just realised, that there is a strange date and time on the main page. Used time.windows.com, but didn't work. Tried another time server, the same.
Correct time in the devices doesn't really matter but maybe you have a suggestion.
So far the AP and the Station work very well. Have a fast and stable link.
I like the Nano!!!
use your router sa NTP server do not use nanos ntp, mine works very well i have VOIP Phone connected to wireless nanos clock is sync properly :icon_lol:
