PDA

View Full Version : AIROS V FIRMWARE UPDATE


onetechct
08-21-2009, 05:50 PM
I have 10 bullet M 5ghz Firmware Version XM.v5.0 with some lookup and stability problems, is there new update firmware ?

UBNT-Mike.Ford
08-21-2009, 06:02 PM
Hello,

That is the latest firmware at the time. What stability issues are you running into?

Thanks,

Mike

george
08-21-2009, 06:07 PM
Mike, I thought 5.0.1 was out, or at least an updated build number that dealt with the RSSI indicator issue.

How do we get access to that build?

Thanks
George

MaximumISP
08-22-2009, 02:27 AM
Mike I think I may have found a glitch
with B5M PTP link if I disable the LAN port on the
Station WDS then save and reboot the LAN is still connected
Disabling WLAN on the AP WDS seems to work fine though
hevent tried diabling the WLAN on a WDS station yet though
(dont wanna have to drive 20K to fix it )

onetechct
08-22-2009, 12:36 PM
During my testing tried Italy country and unit lookup !!!
Disconnect power and reconect and now work.
Troughtput is around 60mb single 40mhz, but it avaiable only for USA and maximum distance is limited, also country not have compliance test.I have license for all fq but can't to use.

wispwest
08-22-2009, 12:39 PM
is 5.01 out? Also, ^^^ your 60M throughput, are you just reading the RF Data Rate, or doing actually TCP throughput tests?

onetechct
08-22-2009, 12:48 PM
Tested with Chariot, around 60mb single way, no tried in the 2 direction.
Datarate is 150mb -68dbm with 40 mhz channel USA country

wispwest
08-22-2009, 12:51 PM
^^^ that is what I got in the office at 20 ft, how long is your link? I cannot get decent throughput at a little over 1 mile, and quite dissapointed

UBNT-Mike.Ford
08-23-2009, 10:27 AM
^^^ that is what I got in the office at 20 ft, how long is your link? I cannot get decent throughput at a little over 1 mile, and quite dissapointed

Hello,

Please post your configuration files along with your badnwidth testing method.

Thanks,

Mike

UBNT-Edmundas
08-25-2009, 12:51 AM
Mike I think I may have found a glitch
with B5M PTP link if I disable the LAN port on the
Station WDS then save and reboot the LAN is still connected
Disabling WLAN on the AP WDS seems to work fine though
hevent tried diabling the WLAN on a WDS station yet though
(dont wanna have to drive 20K to fix it )

Thanks for your report. We will check it and fix in next fw release.

CzechEnglishFrenchGermanItalianPolishPortugueseRussianSpanish
Translations made by vB Enterprise Translator 3.5.4