Nanostation MIMO 5 GHZ Two Ethernet ports! [Archive]

normangon

08-18-2009, 09:13 PM

It's possible use each ethernet port to recive a separate stream of data ex: voice and data, video and data.

WHT

08-18-2009, 09:17 PM

Not really, the two ethernet ports are for the convince of not having to use a hub.

UBNT-Mike.Ford

08-19-2009, 09:17 AM

Hello,

The two Ethernet ports act as a simple hub.

Thanks,

Mike

masked

08-19-2009, 09:31 AM

bridged switch, shared nic?

UBNT-Mike.Ford

08-19-2009, 09:48 AM

bridged switch, shared nic?

Hello,

Its a simple hub/shared NIC. Its their to provide access to another Ethernet device.

Also that Ethernet Port is software selectable to provide PoE power out of that second port :)

Thanks,

Mike

george

08-19-2009, 10:00 AM

Also that Ethernet Port is software selectable to provide PoE power out of that second port :)

Now that is slick. Any thoughts on how many units you could daisy chain before you ran out of power?

WHT

08-19-2009, 10:12 AM

Depends on your power supply.

Ron

08-19-2009, 10:28 AM

Depends on your power supply.

I'm sure there must also be a current limit.

It's really too bad the Rocket can't do this, since it is Sectors we need to connect to each other.

JustJoe

08-19-2009, 10:34 AM

Depends on your power supply.

I'm sure there must also be a current limit.

It's really too bad the Rocket can't do this, since it is Sectors we need to connect to each other.

Indeeeeeeed :P

UBNT-Mike.Ford

08-19-2009, 11:41 AM

Hey Guys,

This option is generally for powering things like Cameras and what not.

Thanks,

Mike

InoX

08-19-2009, 03:29 PM

for me will be very useful a second lan

osnet

08-19-2009, 03:34 PM

Man that will crush the sh!@#$%^ Airaya Market with the CCTV

jajaja. I hate does radios Airaya really it's expensive.

Regards,

Rururudy

08-19-2009, 08:59 PM

Hey Guys,

This option is generally for powering things like Cameras and what not.

Thanks,

Mike

Can I pop a Picostation on the other side of a point to point link using two NanoStation M's?

I have a Point To Point customer and would like to add a Pico with an omni at the far end... then when I go to the park across the street I can use my laptop. :)

UBNT-Mike.Ford

08-20-2009, 09:20 AM

Hey Guys,

This option is generally for powering things like Cameras and what not.

Thanks,

Mike

Can I pop a Picostation on the other side of a point to point link using two NanoStation M's?

I have a Point To Point customer and would like to add a Pico with an omni at the far end... then when I go to the park across the street I can use my laptop. :)

Hello,

Yes the second Ethernet port could power a regular Pico, but not a Pico2HP.

Thanks,

Mike