BULLET2M 802.11B compatibility

[spainuser]

Does BULLET2M-HP supports 802.11B mode (1, 2, 5.5 and 11 mbps DSS modulation) ?



Thanks,


Juan

[UBNT-Mike.Ford]

Hello,

Yes as a client it will talk, but does not support B - Only mode. The unit alwas operaes in 11bgn mixed mode

Thanks,

Mike

[WHT]

Yes and no...It will communicate with legacy 802.11b/g radios, but you won't be able to take advantage of any 802.11n features. Even if you had an entire deployment with the M family, adding just one non-M device will cause too many problems.

[spainuser]

Does BULLET2M as AP synchronize to 1 Mbps 802.11b DSS modulation if client require (by low signal) ?


what options appear in the list IEEE 802.11 MODE GUI (in nanostation 2 are B ONLY, B/G MIXED and G ONLY)?



Thanks,


Juan

[UBNT-Mike.Ford]

Does BULLET2M as AP synchronize to 1 Mbps 802.11b DSS modulation if client require (by low signal) ?


what options appear in the list IEEE 802.11 MODE GUI (in nanostation 2 are B ONLY, B/G MIXED and G ONLY)?



Thanks,


Juan

Hello,

You will only see 11bgn as an options. You cannot set to native B mode.

Thanks,

[spainuser]

Then a old card 802.11B only can to connect to BULLETM2 AP (please test in you labs) ?



Thanks,

Juan

[UBNT-Mike.Ford]

Then a old card 802.11B only can to connect to BULLETM2 AP (please test in you labs) ?



Thanks,

Juan

Hello,

This is not supported. I would suggest purchasing an 802.11b access point.

Thans,

Mike

[spainuser]

Ok, then BULLET2M only operate in G (6-54 mbps) and N modes as Access Point?


Also question to : "Does BULLET2M as AP synchronize to 1 Mbps 802.11b DSS modulation if client require (by low signal) ?" is NO why BULLET2M no support 802.11B, correct?


Please aclaration.


Thanks,

Juan

[UBNT-Mike.Ford]

Ok, then BULLET2M only operate in G (6-54 mbps) and N modes as Access Point?


Also question to : "Does BULLET2M as AP synchronize to 1 Mbps 802.11b DSS modulation if client require (by low signal) ?" is NO why BULLET2M no support 802.11B, correct?


Please aclaration.


Thanks,

Juan

Hello,

I would suggest purchasing a regular Bullet to connect to legacy access points.

Thanks,

Mike

[spainuser]

Mike why does not support BULLET2M 802.11B Access point mode? Hardware or software?


Also, what is RX sensivity of BULLET2M in OFDM 802.11G 6 mbps?, does not appear in datasheet.



Thanks Mike,


Juan

[Shockware1]

They probably do not support it for the same reason WalMart does not sell 8-track players. They already have products that cover this market segment. Why put effort into making a new product support such old systems when they have a product in production that already does?

The Bullet2HP or Bullet2 likely have more than enough resources to manage a B only network at peak efficiency.