eschoeller
05-21-2009, 12:50 AM
Hi,
I used a .config provided for the routerstation, made a few tweaks and now have:
KAMIKAZE (bleeding edge, r15920)
running on the LS-SR71, however I can't get the ethernet jack working.
ar71xx: using random MAC address for eth0
ag71xx_mdio:probed
eth0: Atheros AG71xx at 0xb9000000, irq 4
eth0: no PHY found with phy_mask=00100000
eth0: Atheros AG71xx at 0xba000000, irq 5
eth0: no PHY found with phy_mask=000f0000
Atheros AR71xx SPI Controller driver version 0.2.2
phy0: Selected rate control algorithm 'ath9k_rate_control'
Registered led device: ath9k-phy0::radio
Registered led device: ath9k-phy0::assoc
Registered led device: ath9k-phy0::tx
Registered led device: ath9k-phy0:rx
phy0: Atheros AR9160 MAC/BB Rev:0 AR5133 RF Rev:b0:
mem=0xb0000000, irq=32
Any idea on what I'm missing, or what's wrong?
Thanks.
I used a .config provided for the routerstation, made a few tweaks and now have:
KAMIKAZE (bleeding edge, r15920)
running on the LS-SR71, however I can't get the ethernet jack working.
ar71xx: using random MAC address for eth0
ag71xx_mdio:probed
eth0: Atheros AG71xx at 0xb9000000, irq 4
eth0: no PHY found with phy_mask=00100000
eth0: Atheros AG71xx at 0xba000000, irq 5
eth0: no PHY found with phy_mask=000f0000
Atheros AR71xx SPI Controller driver version 0.2.2
phy0: Selected rate control algorithm 'ath9k_rate_control'
Registered led device: ath9k-phy0::radio
Registered led device: ath9k-phy0::assoc
Registered led device: ath9k-phy0::tx
Registered led device: ath9k-phy0:rx
phy0: Atheros AR9160 MAC/BB Rev:0 AR5133 RF Rev:b0:
mem=0xb0000000, irq=32
Any idea on what I'm missing, or what's wrong?
Thanks.