AP access through WLAN

[davekall]

I am having a very puzzling problem. I am using a Pico2. I am able to access the AP if I go through the LAN but if I am authenticated through the WLAN I am no longer able to access the AP. I can get DCHP through the WLAN but no connectivity to the AP. Never seen this before on other APs. I am sure its a setting somewhere. Any help will be greatly appreciated!

Thanks!
Dave Kallweit :lol:

[WHT]

Can you post your config file?

[davekall]

Sure, here it is....


aaa.1.status=disabled
aaa.status=disabled
bridge.1.devname=br0
bridge.1.fd=1
bridge.1.port.1.devname=eth0
bridge.1.port.1.status=enabled
bridge.1.port.2.devname=ath0
bridge.1.port.2.status=enabled
bridge.status=disabled
dhcpc.1.devname=br0
dhcpc.1.status=disabled
dhcpc.status=disabled
dhcpd.1.devname=ath0
dhcpd.1.dnsproxy=enabled
dhcpd.1.end=192.168.10.40
dhcpd.1.lease_time=3600
dhcpd.1.netmask=255.255.255.0
dhcpd.1.start=192.168.10.30
dhcpd.1.status=enabled
dhcpd.status=enabled
dnsmasq.1.devname=ath0
dnsmasq.1.status=disabled
dnsmasq.status=disabled
ebtables.1.cmd=-t nat -A PREROUTING --in-interface ath0 -j arpnat --arpnat-target ACCEPT
ebtables.1.status=enabled
ebtables.2.cmd=-t nat -A POSTROUTING --out-interface ath0 -j arpnat --arpnat-target ACCEPT
ebtables.2.status=enabled
ebtables.3.cmd=-t broute -A BROUTING --protocol 0x888e --in-interface ath0 -j DROP
ebtables.3.status=disabled
ebtables.status=disabled
httpd.port=80
httpd.status=enabled
igmpproxy.status=disabled
iptables.1.status=disabled
iptables.2.status=disabled
iptables.200.status=disabled
iptables.3.status=disabled
iptables.4.status=disabled
iptables.5.status=disabled
iptables.50.status=disabled
iptables.51.status=disabled
iptables.52.status=disabled
iptables.status=disabled
netconf.1.autoip.status=enabled
netconf.1.devname=eth0
netconf.1.ip=192.168.10.20
netconf.1.netmask=255.255.255.0
netconf.1.promisc=enabled
netconf.1.status=enabled
netconf.1.up=enabled
netconf.2.autoip.status=enabled
netconf.2.devname=ath0
netconf.2.ip=192.168.10.20
netconf.2.netmask=255.255.255.0
netconf.2.status=enabled
netconf.2.up=enabled
netconf.3.alias.1.status=disabled
netconf.3.alias.2.status=disabled
netconf.3.alias.3.status=disabled
netconf.3.alias.4.status=disabled
netconf.3.alias.5.status=disabled
netconf.3.alias.6.status=disabled
netconf.3.alias.7.status=disabled
netconf.3.alias.8.status=disabled
netconf.3.devname=br0
netconf.3.ip=192.168.1.20
netconf.3.netmask=255.255.255.0
netconf.3.status=disabled
netconf.3.up=enabled
netconf.status=enabled
netmode=router
ppp.1.password=
ppp.1.status=disabled
ppp.status=disabled
radio.1.ack.auto=enabled
radio.1.acktimeout=48
radio.1.channel=1
radio.1.chanshift=0
radio.1.clksel=0
radio.1.countrycode=840
radio.1.devname=ath0
radio.1.ieee_mode=g
radio.1.mcastrate=1M
radio.1.mode=master
radio.1.rate.auto=enabled
radio.1.rate.max=54M
radio.1.rx_antenna=1
radio.1.rx_antenna_diversity=disabled
radio.1.status=enabled
radio.1.tx_antenna=1
radio.1.tx_antenna_diversity=disabled
radio.1.txpower=16
radio.countrycode=840
radio.ratemodule=ath_rate_minstrel
radio.status=enabled
resolv.nameserver.1.ip=4.2.2.2
resolv.nameserver.1.status=enabled
resolv.nameserver.2.status=disabled
resolv.status=enabled
route.1.devname=br0
route.1.gateway=192.168.10.1
route.1.ip=0.0.0.0
route.1.netmask=0
route.1.status=enabled
route.status=enabled
users.1.name=ubnt
users.1.password=VvpvCwhccFv6Q
users.1.status=enabled
users.status=enabled
wireless.1.ap=
wireless.1.authmode=1
wireless.1.devname=ath0
wireless.1.hide_ssid=disabled
wireless.1.mac_acl.1.mac=
wireless.1.mac_acl.1.status=disabled
wireless.1.mac_acl.10.mac=
wireless.1.mac_acl.10.status=disabled
wireless.1.mac_acl.11.mac=
wireless.1.mac_acl.11.status=disabled
wireless.1.mac_acl.12.mac=
wireless.1.mac_acl.12.status=disabled
wireless.1.mac_acl.13.mac=
wireless.1.mac_acl.13.status=disabled
wireless.1.mac_acl.14.mac=
wireless.1.mac_acl.14.status=disabled
wireless.1.mac_acl.15.mac=
wireless.1.mac_acl.15.status=disabled
wireless.1.mac_acl.16.mac=
wireless.1.mac_acl.16.status=disabled
wireless.1.mac_acl.2.mac=
wireless.1.mac_acl.2.status=disabled
wireless.1.mac_acl.3.mac=
wireless.1.mac_acl.3.status=disabled
wireless.1.mac_acl.4.mac=
wireless.1.mac_acl.4.status=disabled
wireless.1.mac_acl.5.mac=
wireless.1.mac_acl.5.status=disabled
wireless.1.mac_acl.6.mac=
wireless.1.mac_acl.6.status=disabled
wireless.1.mac_acl.7.mac=
wireless.1.mac_acl.7.status=disabled
wireless.1.mac_acl.8.mac=
wireless.1.mac_acl.8.status=disabled
wireless.1.mac_acl.9.mac=
wireless.1.mac_acl.9.status=disabled
wireless.1.mac_acl.policy=allow
wireless.1.mac_acl.status=disabled
wireless.1.macclone=disabled
wireless.1.scan_list.status=disabled
wireless.1.security=none
wireless.1.ssid=APTEST
wireless.1.status=enabled
wireless.1.wds=disabled
wireless.status=enabled
wpasupplicant.device.1.status=disabled
wpasupplicant.status=disabled



Thanks! :)
Dave